lkml.org 
[lkml]   [2019]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1] Bluetooth: hci_qca: Give enough time to ROME controller to bootup.
On Wed, Mar 13, 2019 at 5:45 PM <rjliao@codeaurora.org> wrote:
>
> 在 2019-03-07 14:49,Balakrishna Godavarthi 写道:
> > Hi Stepen,
> >
> > On 2019-03-07 04:03, Stephen Boyd wrote:
> >> Quoting Balakrishna Godavarthi (2019-03-06 08:21:13)
> >>> This patch enables enough time to ROME controller to bootup
> >>> after we bring the enable ping out of reset.
> >>>
> >>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> >>> ---
> >>
> >> Any Fixes tag? And maybe some more explanation or background on where
> >> 150 ms sleep comes from would be useful. Was it determined
> >> experimentally or did it come from a datasheet somewhere? Does the
> >> time
> >> differ between boards?
> >>
> > [Bala]: this was observed in our stress testing and even the CHIP
> > firmware team
> > confirmed that BT chip required at least 150 ms to boot up.
> >
> > @Rocky to confirm my statement.
> >
> >>> drivers/bluetooth/hci_qca.c | 2 ++
> >>> 1 file changed, 2 insertions(+)
> >>>
> >>> diff --git a/drivers/bluetooth/hci_qca.c
> >>> b/drivers/bluetooth/hci_qca.c
> >>> index 237aea34b69f..1953b13511e7 100644
> >>> --- a/drivers/bluetooth/hci_qca.c
> >>> +++ b/drivers/bluetooth/hci_qca.c
> >>> @@ -508,6 +508,8 @@ static int qca_open(struct hci_uart *hu)
> >>> qcadev = serdev_device_get_drvdata(hu->serdev);
> >>> if (qcadev->btsoc_type != QCA_WCN3990) {
> >>> gpiod_set_value_cansleep(qcadev->bt_en, 1);
> >>> + /* Controller needs time to bootup. */
> >>> + msleep(150);
> >>> } else {
> >>> hu->init_speed = qcadev->init_speed;
> >>> hu->oper_speed = qcadev->oper_speed;
>
> Hello,
>
> Any concern to merge this change? Without this change the Rome cannot up
> while running the serdev way, we should mainline this change ASAP.

Stephen was also asking about a Fixes tag, maybe we should add this?
Fixes: 05ba533c5c11 ("Bluetooth: hci_qca: Add serdev support")

\
 
 \ /
  Last update: 2019-03-19 01:50    [W:0.093 / U:4.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site