lkml.org 
[lkml]   [2019]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v4 5/7] staging: iio: ad5933: add ABI documentation
Add an ABI documentation for the ad5933 driver.

Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
---
.../sysfs-bus-iio-impedance-analyzer-ad5933 | 35 +++++++++++++++++++
.../sysfs-bus-iio-impedance-analyzer-ad5933 | 30 ----------------
2 files changed, 35 insertions(+), 30 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933
delete mode 100644 drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 b/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933
new file mode 100644
index 000000000000..a50aada68e1e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933
@@ -0,0 +1,35 @@
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_start
+Date: March 2019
+KernelVersion: 3.1.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Frequency sweep start frequency in Hz.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_increment
+Date: March 2019
+KernelVersion: 3.1.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Frequency increment in Hz (step size) between consecutive
+ frequency points along the sweep.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_points
+Date: March 2019
+KernelVersion: 3.1.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Number of frequency points (steps) in the frequency sweep.
+ This value, in conjunction with the
+ out_altvoltageY_frequency_start and the
+ out_altvoltageY_frequency_increment, determines the frequency
+ sweep range for the sweep operation.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_settling_cycles
+Date: March 2019
+KernelVersion: 3.1.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Number of output excitation cycles (settling time cycles)
+ that are allowed to pass through the unknown impedance,
+ after each frequency increment, and before the ADC is triggered
+ to perform a conversion sequence of the response signal.
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933 b/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933
deleted file mode 100644
index 79c7e88c64cd..000000000000
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933
+++ /dev/null
@@ -1,30 +0,0 @@
-What: /sys/bus/iio/devices/iio:deviceX/outY_freq_start
-KernelVersion: 3.1.0
-Contact: linux-iio@vger.kernel.org
-Description:
- Frequency sweep start frequency in Hz.
-
-What: /sys/bus/iio/devices/iio:deviceX/outY_freq_increment
-KernelVersion: 3.1.0
-Contact: linux-iio@vger.kernel.org
-Description:
- Frequency increment in Hz (step size) between consecutive
- frequency points along the sweep.
-
-What: /sys/bus/iio/devices/iio:deviceX/outY_freq_points
-KernelVersion: 3.1.0
-Contact: linux-iio@vger.kernel.org
-Description:
- Number of frequency points (steps) in the frequency sweep.
- This value, in conjunction with the outY_freq_start and the
- outY_freq_increment, determines the frequency sweep range
- for the sweep operation.
-
-What: /sys/bus/iio/devices/iio:deviceX/outY_settling_cycles
-KernelVersion: 3.1.0
-Contact: linux-iio@vger.kernel.org
-Description:
- Number of output excitation cycles (settling time cycles)
- that are allowed to pass through the unknown impedance,
- after each frequency increment, and before the ADC is triggered
- to perform a conversion sequence of the response signal.
--
2.20.1
\
 
 \ /
  Last update: 2019-03-16 16:08    [W:0.055 / U:32.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site