lkml.org 
[lkml]   [2019]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/6] leds: netdev trigger: allow setting initial values in device tree
Date
It can be quite convenient to initialize a netdev-triggered LED with a
device name and setting the rx,tx,link properties from device tree,
instead of having to do that in an init script (or udev rule) in
userspace.

My main motivation for this is to be able to switch away from the
deprecated CONFIG_CAN_LEDS. The example added to common.txt
corresponds to switching linux,default-trigger = "can0-rxtx" to
"netdev" and adding the indicated netdev subnode.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
.../devicetree/bindings/leds/common.txt | 11 +++++++
drivers/leds/trigger/ledtrig-netdev.c | 30 +++++++++++++++++++
2 files changed, 41 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 7cb88460a47c..f8078c4cf6f8 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -43,6 +43,17 @@ Optional properties for child nodes:
Documentation/ABI/testing/sysfs-class-led-trigger-netdev)
to reflect the state and activity of a net device.

+ The optional child node netdev can be used to
+ configure initial values for the link, rx, tx and
+ device_name properties. For example,
+
+ netdev {
+ rx;
+ tx;
+ link;
+ device-name = "can0";
+ };
+
- led-pattern : Array of integers with default pattern for certain triggers.
Each trigger may parse this property differently:
- one-shot : two numbers specifying delay on and delay off (in ms),
diff --git a/drivers/leds/trigger/ledtrig-netdev.c b/drivers/leds/trigger/ledtrig-netdev.c
index e4a76ce4e4c7..387932cfea55 100644
--- a/drivers/leds/trigger/ledtrig-netdev.c
+++ b/drivers/leds/trigger/ledtrig-netdev.c
@@ -20,6 +20,7 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
+#include <linux/of.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include "../leds.h"
@@ -400,6 +401,33 @@ static void netdev_trig_work(struct work_struct *work)
(atomic_read(&trigger_data->interval)*2));
}

+static void netdev_trig_of_init(struct led_classdev *led_cdev,
+ struct led_netdev_data *trigger_data)
+{
+ struct device_node *np = led_cdev->dev->of_node;
+ const char *device_name;
+
+ if (!np)
+ return;
+ np = of_get_child_by_name(np, "netdev");
+ if (!np)
+ return;
+
+ if (of_property_read_bool(np, "link"))
+ __set_bit(NETDEV_LED_LINK, &trigger_data->mode);
+ if (of_property_read_bool(np, "tx"))
+ __set_bit(NETDEV_LED_TX, &trigger_data->mode);
+ if (of_property_read_bool(np, "rx"))
+ __set_bit(NETDEV_LED_RX, &trigger_data->mode);
+ if (!of_property_read_string(np, "device-name", &device_name))
+ netdev_trig_set_device(trigger_data, device_name,
+ strlen(device_name));
+
+ set_baseline_state(trigger_data);
+
+ of_node_put(np);
+}
+
static int netdev_trig_activate(struct led_classdev *led_cdev)
{
struct led_netdev_data *trigger_data;
@@ -423,6 +451,8 @@ static int netdev_trig_activate(struct led_classdev *led_cdev)
trigger_data->mode = 0;
atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
trigger_data->last_activity = 0;
+ if (led_cdev->flags & LED_INIT_DEFAULT_TRIGGER)
+ netdev_trig_of_init(led_cdev, trigger_data);

led_set_trigger_data(led_cdev, trigger_data);

--
2.20.1
\
 
 \ /
  Last update: 2019-03-14 15:07    [W:0.293 / U:17.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site