[lkml]   [2019]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH] phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
On platforms where the MUSB and HCI controllers share PHY0, PHY passby
is required when using the HCI controller with the PHY, but it must be
disabled when the MUSB controller is used instead.

Without this, PHY0 passby is always enabled, which results in broken
peripheral mode on such platforms (e.g. H3/H5).

Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")

Signed-off-by: Paul Kocialkowski <>
drivers/phy/allwinner/phy-sun4i-usb.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 5163097b43df..7b23920e0068 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -551,6 +551,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
struct sun4i_usb_phy_data *data =
container_of(work, struct sun4i_usb_phy_data,;
struct phy *phy0 = data->phys[0].phy;
+ struct sun4i_usb_phy *phy = phy_get_drvdata(phy0);
bool force_session_end, id_notify = false, vbus_notify = false;
int id_det, vbus_det;

@@ -607,6 +608,9 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)

+ /* Enable PHY0 passby for host mode only. */
+ sun4i_usb_phy_passby(phy, !id_det);
/* Re-route PHY0 if necessary */
if (data->cfg->phy0_dual_route)
sun4i_usb_phy0_reroute(data, id_det);
 \ /
  Last update: 2019-03-14 14:06    [W:1.444 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site