lkml.org 
[lkml]   [2019]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/9] arm64: dts: meson: g12a: add uart_ao_a pinctrl
From
Date
On 12/03/2019 22:15, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
>
>> On 07/03/2019 16:13, Neil Armstrong wrote:
>>> From: Jerome Brunet <jbrunet@baylibre.com>
>>>
>>> Add the always on UART pinctrl setting to the g12a soc DT and
>>> use it for the u200 reference design
>>>
>>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>> ---
>>> .../arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 ++
>>> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 18 ++++++++++++++++++
>>> 2 files changed, 20 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>>> index c44dbdddf2cf..f2afd0bf3e28 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
>>> @@ -25,5 +25,7 @@
>>>
>>> &uart_AO {
>>> status = "okay";
>>> + pinctrl-0 = <&uart_ao_a_pins>;
>>> + pinctrl-names = "default";
>>> };
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>>> index c141cc7f6b09..f8f055c49f9a 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>>> @@ -177,6 +177,24 @@
>>> #gpio-cells = <2>;
>>> gpio-ranges = <&ao_pinctrl 0 0 15>;
>>> };
>>> +
>>> + uart_ao_a_pins: uart_a_ao {
>>> + mux {
>>> + groups = "uart_ao_a_tx",
>>> + "uart_ao_a_rx";
>>> + function = "uart_ao_a";
>>> + bias-disable;
>>> + };
>>> + };
>>> +
>>> + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
>>> + mux {
>>> + groups = "uart_ao_a_cts",
>>> + "uart_ao_a_rts";
>>> + function = "uart_ao_a";
>>> + bias-disable;
>>> + };
>>> + };
>>> };
>>> };
>>>
>>>
>>
>> Will move this out of this patchset to the boards patchset
>
> I assume you meant you'd move the first hunk, the one that modifies the
> u200 board to the other series, but keep this hunk in this series?

Yep I will remove the board chunk in the v2 of this patchset.

Neil

>
> Kevin
>

\
 
 \ /
  Last update: 2019-03-13 10:53    [W:0.036 / U:4.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site