lkml.org 
[lkml]   [2019]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED
From
Date
Hi Chuanhong,

On 12/03/2019 09:33, Chuanhong Guo wrote:
> There is a white LED on the front panel behind the logo and the
> manufacturer uses that LED to indicate network and USB drive status.
>
> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
> ---
> .../boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
> index 9a8a8a7e4b53..b5667f1fb2c8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
> @@ -14,6 +14,16 @@
> cvbs-connector {
> status = "disabled";
> };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + status {
> + label = "n1:white:status";
> + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> + };
> };
>
> &cvbs_vdac_port {
>

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

BTW, do you know if it's possible to have a sample of the Phicomm N1
in order to be added in kernelci ?

Neil

\
 
 \ /
  Last update: 2019-03-12 10:00    [W:0.070 / U:3.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site