lkml.org 
[lkml]   [2019]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED
Date
There is a white LED on the front panel behind the logo and the
manufacturer uses that LED to indicate network and USB drive status.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
---
.../boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
index 9a8a8a7e4b53..b5667f1fb2c8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -14,6 +14,16 @@
cvbs-connector {
status = "disabled";
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "n1:white:status";
+ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
};

&cvbs_vdac_port {
--
2.20.1
\
 
 \ /
  Last update: 2019-03-12 09:34    [W:0.071 / U:5.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site