lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 9/9] rtc: Add support for the MediaTek MT6358 RTC
From
Date
On Mon, 2019-03-11 at 11:46 +0800, Hsin-Hsiung Wang wrote:
> From: Ran Bi <ran.bi@mediatek.com>
>
> This add support for the MediaTek MT6358 RTC. MT6397 mfd will pass
> RTC_WRTGR address offset to RTC driver.
>
> Signed-off-by: Ran Bi <ran.bi@mediatek.com>
> ---
> drivers/rtc/rtc-mt6397.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index f85f1fc..c8a0090 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -27,7 +27,7 @@
> #define RTC_BBPU 0x0000
> #define RTC_BBPU_CBUSY BIT(6)
>
> -#define RTC_WRTGR 0x003c
> +#define RTC_WRTGR_DEFAULT 0x003c
>
> #define RTC_IRQ_STA 0x0002
> #define RTC_IRQ_STA_AL BIT(0)
> @@ -78,6 +78,7 @@ struct mt6397_rtc {
> struct regmap *regmap;
> int irq;
> u32 addr_base;
> + u32 wrtgr_offset;

It is strange that hardware change trigger register offset, I think we
have no choice to add a field to describe it.

> };
>
> static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
> @@ -86,7 +87,8 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
> int ret;
> u32 data;
>
> - ret = regmap_write(rtc->regmap, rtc->addr_base + RTC_WRTGR, 1);
> + ret = regmap_write(rtc->regmap,
> + rtc->addr_base + rtc->wrtgr_offset, 1);
> if (ret < 0)
> return ret;
>
> @@ -341,6 +343,15 @@ static int mtk_rtc_probe(struct platform_device *pdev)
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> rtc->addr_base = res->start;
>
> + res = platform_get_resource(pdev, IORESOURCE_REG, 0);
> + if (res) {
> + rtc->wrtgr_offset = res->start;
> + dev_info(&pdev->dev, "register offset:%d\n", rtc->wrtgr_offset);

Nit: useless log

> + } else {
> + rtc->wrtgr_offset = RTC_WRTGR_DEFAULT;
> + dev_err(&pdev->dev, "Failed to get register offset\n");
> + }
> +
> rtc->irq = platform_get_irq(pdev, 0);
> if (rtc->irq < 0)
> return rtc->irq;
> @@ -420,6 +431,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
> mt6397_rtc_resume);
>
> static const struct of_device_id mt6397_rtc_of_match[] = {
> + { .compatible = "mediatek,mt6358-rtc", },
> { .compatible = "mediatek,mt6397-rtc", },
> { }
> };

Without the log, you can my get
Acked-by: Eddie Huang <eddie.huang@mediatekcom>


\
 
 \ /
  Last update: 2019-03-11 07:11    [W:0.235 / U:4.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site