lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH RESEND net] net: phy: xgmiitorgmii: Support generic PHY status read
Hi Andrew,
On Sat, Mar 9, 2019 at 9:53 PM Andrew Lunn <andrew@lunn.ch> wrote:
>
> > Related to this, I have a query on how the DT node for gmii2rgmii should look.
> > One of the users of gmii2rgmii is Cadence macb driver. In Xilinx tree, we use
> > this piece of code to register this mdiobus:
> > + mdio_np = of_get_child_by_name(np, "mdio");
> > + if (mdio_np) {
> > + of_node_put(mdio_np);
> > + err = of_mdiobus_register(bp->mii_bus, mdio_np);
> > + if (err)
> > + goto err_out_unregister_bus;
> >
> > And the DT node looks like this:
> > ethernet {
> > phy-mode = "gmii";
> > phy-handle = <&extphy>;
> >
> > mdio {
> > extphy {
> > reg = <x>;
> > };
> > gmii_to_rgmii{
> > compatible = "xlnx,gmii-to-rgmii-1.0";
> > phy-handle = <&extphy>;
> > reg = <x>;
> > };
> > };
> > };
>
> Hi Harini
>
> You have this setup:
>
> MAC <==> GMII2RGMII <==> RGMII_PHY
>
> So you want the MAC phy-handle to point to the gmii_to_rgmii 'PHY'.
>
> Feel free to submit a patch extending
> Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt to include
> a MAC node, etc.

Thank you, will do the same.

Regards,
Harini

\
 
 \ /
  Last update: 2019-03-11 07:05    [W:0.173 / U:1.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site