lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 1/8] drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support
From
Date
On 08/03/2019 15:54, Rob Herring wrote:
> On Fri, Mar 8, 2019 at 2:05 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Hi Rob,
>>
>> On 08/03/2019 00:13, Rob Herring wrote:
>>> On Fri, Feb 1, 2019 at 6:08 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>
>>>> Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
>>>> Scrambling when supported or mandatory.
>>>>
>>>> This patch also adds an helper to setup the control bit to support
>>>> the high TMDS Bit Period/TMDS Clock-Period Ratio as required with
>>>> TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes.
>>>>
>>>> These changes were based on work done by Huicong Xu <xhc@rock-chips.com>
>>>> and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes
>>>> on the Rockchip 4.4 BSP kernel at [1]
>>>>
>>>> [1] https://github.com/rockchip-linux/kernel/tree/release-4.4
>>>>
>>>> Cc: Nickey Yang <nickey.yang@rock-chips.com>
>>>> Cc: Huicong Xu <xhc@rock-chips.com>
>>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>>>> Tested-by: Heiko Stuebner <heiko@sntech.de>
>>>> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
>>>> ---
>>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 85 ++++++++++++++++++++++++++++++-
>>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 1 +
>>>> include/drm/bridge/dw_hdmi.h | 1 +
>>>> 3 files changed, 85 insertions(+), 2 deletions(-)
>>>
>>> This commit in drm-misc-next is breaking booting on the Rock960. I
>>> have FB and fbcon enabled. The boot hangs after this message:
>>>
>>> [ 3.012334] [drm:rockchip_drm_fbdev_create] FB [1920x1080]-24
>>> kvaddr=(____ptrval____) offset=0 size=8294400
>>
>> Could you give more details on the tree used ? did you bisect to find this commit ?
>
> As I said above, drm-misc-next (from drm-misc tree) is the branch. I
> bisected between it and v5.0. Reverting it fixes booting.

Thanks, could you give more details on the environment ? Did you test over the latest linux-next ?

Can you share the EDID of your monitor ?

Can you check this patch :

----><----------------------------------------------------------------------------------------
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index a63e5f0dae56..f33c2ac158c1 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1268,8 +1268,6 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)

dw_hdmi_phy_power_off(hdmi);

- dw_hdmi_set_high_tmds_clock_ratio(hdmi);
-
/* Leave low power consumption mode by asserting SVSRET. */
if (phy->has_svsret)
dw_hdmi_phy_enable_svsret(hdmi, 1);

\
 
 \ /
  Last update: 2019-03-11 09:55    [W:0.078 / U:2.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site