lkml.org 
[lkml]   [2019]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mmc_spi: add a status check for spi_sync_locked
Hi Kangjie,

Thank you for the patch.

On Sun, Mar 10, 2019 at 01:53:05AM -0600, Kangjie Lu wrote:
> In case spi_sync_locked fails, the fix reports the error and
> returns the error code upstream.
>
> Signed-off-by: Kangjie Lu <kjlu@umn.edu>
> ---
> drivers/mmc/host/mmc_spi.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
> index 1b1498805972..32fea585262b 100644
> --- a/drivers/mmc/host/mmc_spi.c
> +++ b/drivers/mmc/host/mmc_spi.c
> @@ -819,6 +819,10 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
> }
>
> status = spi_sync_locked(spi, &host->m);
> + if (status < 0) {
> + dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status);

I don't think you need to print the status in both hex and in decimal
forms. %d should be enough, error codes are usually printed in decimal
in the kernel. Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> + return status;
> + }
>
> if (host->dma_dev) {
> dma_sync_single_for_cpu(host->dma_dev,

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2019-03-10 14:00    [W:0.049 / U:12.228 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site