lkml.org 
[lkml]   [2019]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] staging: iio: frequency: ad9834: Move phase and scale to standard iio attribute
On Wed, 6 Feb 2019 14:05:42 +0200
Beniamin Bia <biabeniamin@outlook.com> wrote:

> The custom phase and scale attributes were moved to standard iio types.
>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Similar comments apply as to patch 1.

Jonathan
> ---
> drivers/staging/iio/frequency/ad9834.c | 54 +++++++++++++++-----------
> 1 file changed, 32 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
> index 370e8263899e..3ecf976ddefe 100644
> --- a/drivers/staging/iio/frequency/ad9834.c
> +++ b/drivers/staging/iio/frequency/ad9834.c
> @@ -30,8 +30,7 @@
>
> #define AD9834_REG_CMD 0
> #define AD9834_REG_FREQ(chann) (BIT(14) << (chann))
> -#define AD9834_REG_PHASE0 (BIT(15) | BIT(14))
> -#define AD9834_REG_PHASE1 (BIT(15) | BIT(14) | BIT(13))
> +#define AD9834_REG_PHASE(chann) (BIT(15) | BIT(14) | ((chann) << 13UL))
>
> /* Command Control Bits */
>
> @@ -82,6 +81,8 @@ struct ad9834_state {
>
> unsigned long frequency0;
> unsigned long frequency1;
> + unsigned long phase0;
> + unsigned long phase1;
>
> /*
> * DMA (thus cache coherency maintenance) requires the
> @@ -109,6 +110,8 @@ enum ad9834_supported_device_ids {
> .address = (_chan), \
> .channel = (_chan), \
> .info_mask_separate = BIT(IIO_CHAN_INFO_FREQUENCY) \
> + | BIT(IIO_CHAN_INFO_PHASE),\
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> }
>
> static const struct iio_chan_spec ad9833_channels[] = {
> @@ -164,11 +167,22 @@ static int ad9834_write_frequency(struct ad9834_state *st,
> static int ad9834_write_phase(struct ad9834_state *st,
> unsigned long addr, unsigned long phase)
> {
> + int ret;
> +
> if (phase > BIT(AD9834_PHASE_BITS))
> return -EINVAL;
> - st->data = cpu_to_be16(addr | phase);
> + st->data = cpu_to_be16(AD9834_REG_PHASE(addr) | phase);
> +
> + ret = spi_sync(st->spi, &st->msg);
> + if (ret)
> + return ret;
>
> - return spi_sync(st->spi, &st->msg);
> + if (addr == 0)
> + st->phase0 = phase;
> + else
> + st->phase1 = phase;
> +
> + return 0;
> }
>
> static int ad9834_read_raw(struct iio_dev *indio_dev,
> @@ -184,6 +198,16 @@ static int ad9834_read_raw(struct iio_dev *indio_dev,
> else
> *val = st->frequency1;
> return IIO_VAL_INT;
> + case IIO_CHAN_INFO_PHASE:
> + if (chan->address == 0)
> + *val = st->phase0;
> + else
> + *val = st->phase1;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + /*1 hz */
> + *val = 1;
> + return IIO_VAL_INT;
> }
>
> return -EINVAL;
> @@ -198,6 +222,8 @@ static int ad9834_write_raw(struct iio_dev *indio_dev,
> switch (mask) {
> case IIO_CHAN_INFO_FREQUENCY:
> return ad9834_write_frequency(st, chan->address, val);
> + case IIO_CHAN_INFO_PHASE:
> + return ad9834_write_phase(st, chan->address, val);
> default:
> return -EINVAL;
> }
> @@ -222,10 +248,6 @@ static ssize_t ad9834_write(struct device *dev,
>
> mutex_lock(&st->lock);
> switch ((u32)this_attr->address) {
> - case AD9834_REG_PHASE0:
> - case AD9834_REG_PHASE1:
> - ret = ad9834_write_phase(st, this_attr->address, val);
> - break;
> case AD9834_OPBITEN:
> if (st->control & AD9834_MODE) {
> ret = -EINVAL; /* AD9843 reserved mode */
> @@ -385,12 +407,8 @@ static IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, 0444,
> */
>
> static IIO_DEV_ATTR_FREQSYMBOL(0, 0200, NULL, ad9834_write, AD9834_FSEL);
> -static IIO_CONST_ATTR_FREQ_SCALE(0, "1"); /* 1Hz */
>
> -static IIO_DEV_ATTR_PHASE(0, 0, 0200, NULL, ad9834_write, AD9834_REG_PHASE0);
> -static IIO_DEV_ATTR_PHASE(0, 1, 0200, NULL, ad9834_write, AD9834_REG_PHASE1);
> static IIO_DEV_ATTR_PHASESYMBOL(0, 0200, NULL, ad9834_write, AD9834_PSEL);
> -static IIO_CONST_ATTR_PHASE_SCALE(0, "0.0015339808"); /* 2PI/2^12 rad*/
>
> static IIO_DEV_ATTR_PINCONTROL_EN(0, 0200, NULL,
> ad9834_write, AD9834_PIN_SW);
> @@ -401,10 +419,6 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0, ad9834_store_wavetype, 0);
> static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1);
>
> static struct attribute *ad9834_attributes[] = {
> - &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
> - &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
> - &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
> - &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
> @@ -418,10 +432,6 @@ static struct attribute *ad9834_attributes[] = {
> };
>
> static struct attribute *ad9833_attributes[] = {
> - &iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
> - &iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
> - &iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
> - &iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
> &iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
> @@ -545,11 +555,11 @@ static int ad9834_probe(struct spi_device *spi)
> if (ret)
> goto error_clock_unprepare;
>
> - ret = ad9834_write_phase(st, AD9834_REG_PHASE0, 512);
> + ret = ad9834_write_phase(st, 0, 512);
> if (ret)
> goto error_clock_unprepare;
>
> - ret = ad9834_write_phase(st, AD9834_REG_PHASE1, 1024);
> + ret = ad9834_write_phase(st, 1, 1024);
Similar comments. Nicer to use an enum for this and name them.

> if (ret)
> goto error_clock_unprepare;
>

\
 
 \ /
  Last update: 2019-02-09 18:47    [W:0.051 / U:9.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site