lkml.org 
[lkml]   [2019]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/7] add support for SAM9X60 pin controller
On Thu, Jan 31, 2019 at 05:18:00PM +0100, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>

Minor comment for patch 1.

Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> for the
whole series.

>
> This series adds drive strenght and slew rate support for SAMX60's pin
> controller. For drive strenght we could have 2 values: low, high.
> For slew rate we could have 2 values: enable, disabled.
>
> Besides this I took the chance and adapt the documentation for at91 pinctrl
> driver.
>
> Changes in v2:
> - s/microchip,sam9x60-pictrl/microchip,sam9x60-pinctrl in patches 3/7, 5/7
>
> Claudiu Beznea (7):
> pinctrl: at91: add option to use drive strength bits
> pinctrl: at91: add drive strength support for SAM9X60
> pinctrl: at91: add compatibles for SAM9X60 pin controller
> dt-bindings: add documentation for banks
> dt-bindings: add bindings for SAM9X60
> pinctrl: at91: add slewrate support for SAM9X60
> dt-bindings: add documentation for slew rate
>
> .../bindings/pinctrl/atmel,at91-pinctrl.txt | 27 ++++-
> drivers/pinctrl/pinctrl-at91.c | 134 +++++++++++++++++++--
> drivers/pinctrl/pinctrl-at91.h | 3 +
> include/dt-bindings/pinctrl/at91.h | 4 +
> 4 files changed, 155 insertions(+), 13 deletions(-)
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-02-06 09:57    [W:0.204 / U:16.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site