lkml.org 
[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv3 12/27] PCI: mobiveil: move out the link up waiting from mobiveil_host_init
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>

On Tue, Jan 29, 2019 at 1:39 PM Z.q. Hou <zhiqiang.hou@nxp.com> wrote:
>
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
>
> Host initial sequence does not depend on PCIe link up, so move it
> to the place just before the enumeration.
>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
> ---
> V3:
> - No change
>
> drivers/pci/controller/pcie-mobiveil.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
> index 8eee1ab7ee24..c2848c22b466 100644
> --- a/drivers/pci/controller/pcie-mobiveil.c
> +++ b/drivers/pci/controller/pcie-mobiveil.c
> @@ -582,15 +582,8 @@ static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie)
> static int mobiveil_host_init(struct mobiveil_pcie *pcie)
> {
> u32 value, pab_ctrl, type;
> - int err;
> struct resource_entry *win;
>
> - err = mobiveil_bringup_link(pcie);
> - if (err) {
> - dev_info(&pcie->pdev->dev, "link bring-up failed\n");
> - return err;
> - }
> -
> /*
> * program Bus Master Enable Bit in Command Register in PAB Config
> * Space
> @@ -662,7 +655,7 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
> /* setup MSI hardware registers */
> mobiveil_pcie_enable_msi(pcie);
>
> - return err;
> + return 0;
> }
>
> static void mobiveil_mask_intx_irq(struct irq_data *data)
> @@ -922,6 +915,12 @@ static int mobiveil_pcie_probe(struct platform_device *pdev)
> bridge->map_irq = of_irq_parse_and_map_pci;
> bridge->swizzle_irq = pci_common_swizzle;
>
> + ret = mobiveil_bringup_link(pcie);
> + if (ret) {
> + dev_info(dev, "link bring-up failed\n");
> + goto error;
> + }
> +
> /* setup the kernel resources for the newly added PCIe root bus */
> ret = pci_scan_root_bus_bridge(bridge);
> if (ret)
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-02-05 07:10    [W:0.311 / U:36.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site