lkml.org 
[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 2/2] Input: st1232 - switch to gpiod API
From
Date


Martin Kepplinger | Entwicklung Software 

GINZINGER ELECTRONIC SYSTEMS GMBH

Tel.: +43 7723 5422 157
Mail: martin.kepplinger@ginzinger.com
Web: www.ginzinger.com




On 29.01.19 11:23, Martin Kepplinger wrote:
> From: Martin Kepplinger <martin.kepplinger@ginzinger.com>
>
> Use devm_gpiod_get_optional() and gpiod_set_value_cansleep() instead
> of the old API. The st1232_ts_power() now passes on the inverted "poweron"
> value to reflect the correct logical value.
>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
> ---
>
> Tested and works. thanks for your help Dmitry,
>

is this what you had in mind? any problems or questions?

thanks
martin


>
>
>
> drivers/input/touchscreen/st1232.c | 22 ++++++++++------------
> 1 file changed, 10 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
> index 777df903605d..04d75b08be44 100644
> --- a/drivers/input/touchscreen/st1232.c
> +++ b/drivers/input/touchscreen/st1232.c
> @@ -45,7 +45,7 @@ struct st1232_ts_data {
> struct i2c_client *client;
> struct input_dev *input_dev;
> struct dev_pm_qos_request low_latency_req;
> - int reset_gpio;
> + struct gpio_desc *reset_gpio;
> const struct st_chip_info *chip_info;
> int read_buf_len;
> u8 *read_buf;
> @@ -142,8 +142,8 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
>
> static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
> {
> - if (gpio_is_valid(ts->reset_gpio))
> - gpio_direction_output(ts->reset_gpio, poweron);
> + if (ts->reset_gpio)
> + gpiod_set_value_cansleep(ts->reset_gpio, !poweron);
> }
>
> static const struct st_chip_info st1232_chip_info = {
> @@ -215,15 +215,13 @@ static int st1232_ts_probe(struct i2c_client *client,
> ts->client = client;
> ts->input_dev = input_dev;
>
> - ts->reset_gpio = of_get_gpio(client->dev.of_node, 0);
> - if (gpio_is_valid(ts->reset_gpio)) {
> - error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL);
> - if (error) {
> - dev_err(&client->dev,
> - "Unable to request GPIO pin %d.\n",
> - ts->reset_gpio);
> - return error;
> - }
> + ts->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(ts->reset_gpio)) {
> + error = PTR_ERR(ts->reset_gpio);
> + dev_err(&client->dev, "Unable to request GPIO pin: %d.\n",
> + error);
> + return error;
> }
>
> st1232_ts_power(ts, true);
>




________________________________________

Ginzinger electronic systems GmbH
Gewerbegebiet Pirath 16
4952 Weng im Innkreis
www.ginzinger.com

Firmenbuchnummer: FN 364958d
Firmenbuchgericht: Ried im Innkreis
UID-Nr.: ATU66521089


Diese Nachricht ist vertraulich und darf nicht an andere Personen weitergegeben oder von diesen verwendet werden. Verständigen Sie uns, wenn Sie irrtümlich eine Mitteilung empfangen haben.

This message is confidential. It may not be disclosed to, or used by, anyone other than the addressee. If you receive this message by mistake, please advise the sender.
[unhandled content-type:application/x-pkcs7-signature]
\
 
 \ /
  Last update: 2019-02-05 11:21    [W:0.086 / U:1.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site