lkml.org 
[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] clk: sunxi-ng: sun4i: Use CLK_SET_RATE_PARENT for mmc2 clock
On Sat, Feb 02, 2019 at 05:52:09PM +0200, Priit Laes wrote:
> Recent patch of improving MP clock rate calculations by taking
> into account whether adjusting parent rate is allowed, have
> unfortunately broken eMMC support on A20 Olinuxino-Lime2-eMMC
> boards which fail with following error:
>
> [snip]
> EXT4-fs (mmcblk1p4): INFO: recovery required on readonly filesystem
> EXT4-fs (mmcblk1p4): write access will be enabled during recovery
> sunxi-mmc 1c11000.mmc: data error, sending stop command
> sunxi-mmc 1c11000.mmc: send stop command failed
> [/snip]
>
> Previously, mmc2 clock was requesting 520MHz and settling at 512MHz
> clock rate with following parents:
> [snip]
> pll-ddr-base 2 2 0 768000000 0 0 50000
> pll-ddr-other 1 1 0 768000000 0 0 50000
> mmc2 0 0 0 51200000 0 0 50000
> [/snip]
>
> Now, after the improvements, requested and settled rate are both
> 520MHz, but as mmc2 clock cannot adjust parent rate, the situation
> ends up like this:
> [snip]
> pll-periph-base 3 3 0 1200000000 0 0 50000
> pll-periph 6 6 0 600000000 0 0 50000
> mmc2 3 3 0 50000000 0 0 50000
> [/snip]
>
> With this patch (allowing mmc2 to set parent rate), we end up with
> working tree with both mmc0 (sd-card) and mmc2 (eMMC) working:
> [snip]
> pll-periph-base 3 3 0 312000000 0 0 50000
> mbus 1 1 0 78000000 0 0 50000
> pll-periph-sata 1 1 0 26000000 0 0 50000
> sata 1 1 0 26000000 0 0 50000
> pll-periph 5 5 0 156000000 0 0 50000
> mmc2 0 0 0 52000000 0 0 50000
> mmc0 0 0 0 39000000 0 0 50000
> [/snip]
>
> Fixes: 3f790433c3cb ("clk: sunxi-ng: Adjust MP clock parent rate when allowed")
> Signed-off-by: Priit Laes <plaes@plaes.org>

Applied, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-02-05 10:59    [W:0.059 / U:8.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site