lkml.org 
[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V9 3/5] i2c: tegra: Add DMA support
From
Date
03.02.2019 17:47, Dmitry Osipenko пишет:
> 01.02.2019 20:07, Sowjanya Komatineni пишет:
>> This patch adds DMA support for Tegra I2C.
>>
>> Tegra I2C TX and RX FIFO depth is 8 words. PIO mode is used for
>> transfer size of the max FIFO depth and DMA mode is used for
>> transfer size higher than max FIFO depth to save CPU overhead.
>>
>> PIO mode needs full intervention of CPU to fill or empty FIFO's
>> and also need to service multiple data requests interrupt for the
>> same transaction. This adds delay between data bytes of the same
>> transfer when CPU is fully loaded and some slave devices has
>> internal timeout for no bus activity and stops transaction to
>> avoid bus hang. DMA mode is helpful in such cases.
>>
>> DMA mode is also helpful for Large transfers during downloading or
>> uploading FW over I2C to some external devices.
>>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>> ---
>> [V9] : Rebased to 5.0-rc4
>> Removed dependency of APB DMA in Kconfig and added conditional check
>> in I2C driver to decide on using DMA mode.
>> Changed back the allocation of dma buffer during i2c probe.
>> Fixed FIFO triggers depending on DMA Vs PIO.
>> [V8] : Moved back dma init to i2c probe, removed ALL_PACKETS_XFER_COMPLETE
>> interrupt and using PACKETS_XFER_COMPLETE interrupt only and some
>> other fixes
>> Updated Kconfig for APB_DMA dependency
>> [V7] : Same as V6
>> [V6] : Updated for proper buffer allocation/freeing, channel release.
>> Updated to use exact xfer size for syncing dma buffer.
>> [V5] : Same as V4
>> [V4] : Updated to allocate DMA buffer only when DMA mode.
>> Updated to fall back to PIO mode when DMA channel request or
>> buffer allocation fails.
>> [V3] : Updated without additional buffer allocation.
>> [V2] : Updated based on V1 review feedback along with code cleanup for
>> proper implementation of DMA.
>>
>> drivers/i2c/busses/i2c-tegra.c | 368 +++++++++++++++++++++++++++++++++++++----
>> 1 file changed, 335 insertions(+), 33 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
>> index 118b7023a0f4..ac8009c35863 100644
>> --- a/drivers/i2c/busses/i2c-tegra.c
>> +++ b/drivers/i2c/busses/i2c-tegra.c
>> @@ -8,6 +8,9 @@
>>
>> #include <linux/clk.h>
>> #include <linux/delay.h>
>> +#include <linux/dmaengine.h>
>> +#include <linux/dmapool.h>
>> +#include <linux/dma-mapping.h>
>> #include <linux/err.h>
>> #include <linux/i2c.h>
>> #include <linux/init.h>
>> @@ -44,6 +47,8 @@
>> #define I2C_FIFO_CONTROL_RX_FLUSH BIT(0)
>> #define I2C_FIFO_CONTROL_TX_TRIG_SHIFT 5
>> #define I2C_FIFO_CONTROL_RX_TRIG_SHIFT 2
>> +#define I2C_FIFO_CONTROL_TX_TRIG(x) (((x) - 1) << 5)
>> +#define I2C_FIFO_CONTROL_RX_TRIG(x) (((x) - 1) << 2)
>> #define I2C_FIFO_STATUS 0x060
>> #define I2C_FIFO_STATUS_TX_MASK 0xF0
>> #define I2C_FIFO_STATUS_TX_SHIFT 4
>> @@ -125,6 +130,19 @@
>> #define I2C_MST_FIFO_STATUS_TX_MASK 0xff0000
>> #define I2C_MST_FIFO_STATUS_TX_SHIFT 16
>>
>> +/* Packet header size in bytes */
>> +#define I2C_PACKET_HEADER_SIZE 12
>> +
>> +#define DATA_DMA_DIR_TX (1 << 0)
>> +#define DATA_DMA_DIR_RX (1 << 1)
>> +
>> +/*
>> + * Upto I2C_PIO_MODE_MAX_LEN bytes, controller will use PIO mode,
>> + * above this, controller will use DMA to fill FIFO.
>> + * MAX PIO len is 20 bytes excluding packet header.
>> + */
>> +#define I2C_PIO_MODE_MAX_LEN 32
>> +
>> /*
>> * msg_end_type: The bus control which need to be send at end of transfer.
>> * @MSG_END_STOP: Send stop pulse at end of transfer.
>> @@ -191,6 +209,7 @@ struct tegra_i2c_hw_feature {
>> * @fast_clk: clock reference for fast clock of I2C controller
>> * @rst: reset control for the I2C controller
>> * @base: ioremapped registers cookie
>> + * @base_phys: Physical base address of the I2C controller
>> * @cont_id: I2C controller ID, used for packet header
>> * @irq: IRQ number of transfer complete interrupt
>> * @irq_disabled: used to track whether or not the interrupt is enabled
>> @@ -204,6 +223,13 @@ struct tegra_i2c_hw_feature {
>> * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
>> * @is_multimaster_mode: track if I2C controller is in multi-master mode
>> * @xfer_lock: lock to serialize transfer submission and processing
>> + * @tx_dma_chan: DMA transmit channel
>> + * @rx_dma_chan: DMA receive channel
>> + * @dma_phys: handle to DMA resources
>> + * @dma_buf: pointer to allocated DMA buffer
>> + * @dma_buf_size: DMA buffer size
>> + * @is_curr_dma_xfer: indicates active DMA transfer
>> + * @dma_complete: DMA completion notifier
>> */
>> struct tegra_i2c_dev {
>> struct device *dev;
>> @@ -213,6 +239,7 @@ struct tegra_i2c_dev {
>> struct clk *fast_clk;
>> struct reset_control *rst;
>> void __iomem *base;
>> + phys_addr_t base_phys;
>> int cont_id;
>> int irq;
>> bool irq_disabled;
>> @@ -226,6 +253,13 @@ struct tegra_i2c_dev {
>> u16 clk_divisor_non_hs_mode;
>> bool is_multimaster_mode;
>> spinlock_t xfer_lock;
>> + struct dma_chan *tx_dma_chan;
>> + struct dma_chan *rx_dma_chan;
>> + dma_addr_t dma_phys;
>> + u32 *dma_buf;
>> + unsigned int dma_buf_size;
>> + bool is_curr_dma_xfer;
>> + struct completion dma_complete;
>> };
>>
>> static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
>> @@ -294,6 +328,86 @@ static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
>> i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
>> }
>>
>> +static void tegra_i2c_dma_complete(void *args)
>> +{
>> + struct tegra_i2c_dev *i2c_dev = args;
>> +
>> + complete(&i2c_dev->dma_complete);
>> +}
>> +
>> +static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
>> +{
>> + struct dma_async_tx_descriptor *dma_desc;
>> + enum dma_transfer_direction dir;
>> + struct dma_chan *chan;
>> +
>> + dev_dbg(i2c_dev->dev, "starting DMA for length: %zu\n", len);
>> + reinit_completion(&i2c_dev->dma_complete);
>> + dir = i2c_dev->msg_read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
>> + chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan;
>> + dma_desc = dmaengine_prep_slave_single(chan, i2c_dev->dma_phys,
>> + len, dir, DMA_PREP_INTERRUPT |
>> + DMA_CTRL_ACK);
>> + if (!dma_desc) {
>> + dev_err(i2c_dev->dev, "failed to get DMA descriptor\n");
>> + return -EIO;
>> + }
>> +
>> + dma_desc->callback = tegra_i2c_dma_complete;
>> + dma_desc->callback_param = i2c_dev;
>> + dmaengine_submit(dma_desc);
>> + dma_async_issue_pending(chan);
>> + return 0;
>> +}
>> +
>> +static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
>> +{
>> + struct dma_chan *dma_chan;
>> + u32 *dma_buf;
>> + dma_addr_t dma_phys;
>> + int err = 0;
>> +
>> + if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA))
>> + return -ENODEV;
>> +
>> + dma_chan = dma_request_slave_channel_reason(i2c_dev->dev, "rx");
>> + if (IS_ERR(dma_chan))
>> + return PTR_ERR(dma_chan);
>> +
>> + i2c_dev->rx_dma_chan = dma_chan;
>> +
>> + dma_chan = dma_request_slave_channel_reason(i2c_dev->dev, "tx");
>> + if (IS_ERR(dma_chan)) {
>> + err = PTR_ERR(dma_chan);
>> + goto error;
>> + }
>> +
>> + i2c_dev->tx_dma_chan = dma_chan;
>> +
>> + dma_buf = dma_alloc_coherent(i2c_dev->dev,
>> + i2c_dev->dma_buf_size, &dma_phys,
>> + GFP_KERNEL | __GFP_NOWARN);
>> +
>> + if (!dma_buf) {
>> + dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
>> + err = -ENOMEM;
>> + goto error;
>> + }
>> +
>> + i2c_dev->dma_buf = dma_buf;
>> + i2c_dev->dma_phys = dma_phys;
>> + return 0;
>> +
>> +error:
>> + if (i2c_dev->tx_dma_chan)
>> + dma_release_channel(i2c_dev->tx_dma_chan);
>> +
>> + if (i2c_dev->rx_dma_chan)
>> + dma_release_channel(i2c_dev->rx_dma_chan);
>> +
>> + return err;
>> +}
>> +
>> static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
>> {
>> unsigned long timeout = jiffies + HZ;
>> @@ -571,16 +685,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
>> i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
>> }
>>
>> - if (i2c_dev->hw->has_mst_fifo) {
>> - val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) |
>> - I2C_MST_FIFO_CONTROL_RX_TRIG(1);
>> - i2c_writel(i2c_dev, val, I2C_MST_FIFO_CONTROL);
>> - } else {
>> - val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
>> - 0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
>> - i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
>> - }
>> -
>> err = tegra_i2c_flush_fifos(i2c_dev);
>> if (err)
>> goto err;
>> @@ -660,25 +764,37 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
>> if (i2c_dev->hw->supports_bus_clear && (status & I2C_INT_BUS_CLR_DONE))
>> goto err;
>>
>> - if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
>> - if (i2c_dev->msg_buf_remaining)
>> - tegra_i2c_empty_rx_fifo(i2c_dev);
>> - else
>> - BUG();
>> - }
>> + if (!i2c_dev->is_curr_dma_xfer) {
>> + if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
>> + if (i2c_dev->msg_buf_remaining)
>> + tegra_i2c_empty_rx_fifo(i2c_dev);
>> + else
>> + BUG();
>> + }
>>
>> - if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
>> - if (i2c_dev->msg_buf_remaining)
>> - tegra_i2c_fill_tx_fifo(i2c_dev);
>> - else
>> - tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ);
>> + if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
>> + if (i2c_dev->msg_buf_remaining)
>> + tegra_i2c_fill_tx_fifo(i2c_dev);
>> + else
>> + tegra_i2c_mask_irq(i2c_dev,
>> + I2C_INT_TX_FIFO_DATA_REQ);
>> + }
>> }
>>
>> i2c_writel(i2c_dev, status, I2C_INT_STATUS);
>> if (i2c_dev->is_dvc)
>> dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
>>
>> + /*
>> + * During message read XFER_COMPLETE interrupt is triggered prior to
>> + * DMA completion and during message write XFER_COMPLETE interrupt is
>> + * triggered after DMA completion.
>> + * PACKETS_XFER_COMPLETE indicates completion of all bytes of transfer.
>> + * so forcing msg_buf_remaining to 0 in DMA mode.
>> + */
>> if (status & I2C_INT_PACKET_XFER_COMPLETE) {
>> + if (i2c_dev->is_curr_dma_xfer)
>> + i2c_dev->msg_buf_remaining = 0;
>> BUG_ON(i2c_dev->msg_buf_remaining);
>> complete(&i2c_dev->msg_complete);
>> }
>> @@ -694,12 +810,69 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
>> if (i2c_dev->is_dvc)
>> dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
>>
>> + if (i2c_dev->is_curr_dma_xfer) {
>> + if (i2c_dev->msg_read)
>> + dmaengine_terminate_all(i2c_dev->rx_dma_chan);
>> + else
>> + dmaengine_terminate_all(i2c_dev->tx_dma_chan);
>> +
>> + complete(&i2c_dev->dma_complete);
>> + }
>> +
>> complete(&i2c_dev->msg_complete);
>> done:
>> spin_unlock(&i2c_dev->xfer_lock);
>> return IRQ_HANDLED;
>> }
>>
>> +static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
>> + size_t len, int direction)
>> +{
>> + u32 val, reg;
>> + u8 dma_burst = 0;
>> + struct dma_slave_config dma_sconfig;
>
> This structure is allocated on stack, please initialize it to 0:
>
> struct dma_slave_config dma_sconfig = { 0 };
>
>> + struct dma_chan *chan;
>> +
>> + if (i2c_dev->hw->has_mst_fifo)
>> + reg = I2C_MST_FIFO_CONTROL;
>> + else
>> + reg = I2C_FIFO_CONTROL;
>> + val = i2c_readl(i2c_dev, reg);
>> +
>> + if (len & 0xF)
>> + dma_burst = 1;
>> + else if (len & 0x10)
>> + dma_burst = 4;
>> + else
>> + dma_burst = 8;
>> +
>> + if (direction == DATA_DMA_DIR_TX) {
>> + if (i2c_dev->hw->has_mst_fifo)
>> + val |= I2C_MST_FIFO_CONTROL_TX_TRIG(dma_burst);
>> + else
>> + val |= I2C_FIFO_CONTROL_TX_TRIG(dma_burst);
>> + } else {
>> + if (i2c_dev->hw->has_mst_fifo)
>> + val |= I2C_MST_FIFO_CONTROL_RX_TRIG(dma_burst);
>> + else
>> + val |= I2C_FIFO_CONTROL_RX_TRIG(dma_burst);
>> + }
>> + i2c_writel(i2c_dev, val, reg);
>> +
>> + if (direction == DATA_DMA_DIR_TX) {
>> + dma_sconfig.dst_addr = i2c_dev->base_phys + I2C_TX_FIFO;
>> + dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> + dma_sconfig.dst_maxburst = dma_burst;
>> + } else {
>> + dma_sconfig.src_addr = i2c_dev->base_phys + I2C_RX_FIFO;
>> + dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> + dma_sconfig.src_maxburst = dma_burst;
>> + }
>> +
>> + chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan;

BTW, you could write this as:

if (direction == DATA_DMA_DIR_TX)
chan = i2c_dev->tx_dma_chan;
else
chan = i2c_dev->rx_dma_chan;

for consistency

>> + dmaengine_slave_config(chan, &dma_sconfig);
>> +}


\
 
 \ /
  Last update: 2019-02-03 16:28    [W:0.192 / U:4.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site