lkml.org 
[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 9/9] mtd: rawnand: jz4780-bch: Add support for the JZ4740


Le dim. 3 févr. 2019 à 11:16, Boris Brezillon <bbrezillon@kernel.org>
a écrit :
> On Sun, 03 Feb 2019 10:58:13 -0300
> Paul Cercueil <paul@crapouillou.net> wrote:
>
>> Le dim. 3 févr. 2019 à 4:35, Boris Brezillon
>> <bbrezillon@kernel.org>
>> a écrit :
>> > On Sat, 2 Feb 2019 20:19:26 -0300
>> > Paul Cercueil <paul@crapouillou.net> wrote:
>> >
>> >> Add the backend code for the jz4780-bch driver to support the
>> JZ4740
>> >> SoC from Ingenic.
>> >>
>> >> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> >> ---
>> >>
>> >> Changes:
>> >>
>> >> v2: New patch
>> >>
>> >> drivers/mtd/nand/raw/ingenic/Makefile | 2 +-
>> >> drivers/mtd/nand/raw/ingenic/jz4740_bch.c | 173
>> >> ++++++++++++++++++
>> >> .../mtd/nand/raw/ingenic/jz4780_bch_common.c | 1 +
>> >> .../nand/raw/ingenic/jz4780_bch_internal.h | 1 +
>> >> 4 files changed, 176 insertions(+), 1 deletion(-)
>> >> create mode 100644 drivers/mtd/nand/raw/ingenic/jz4740_bch.c
>> >>
>> >> diff --git a/drivers/mtd/nand/raw/ingenic/Makefile
>> >> b/drivers/mtd/nand/raw/ingenic/Makefile
>> >> index f38b467490cf..d16c96113a93 100644
>> >> --- a/drivers/mtd/nand/raw/ingenic/Makefile
>> >> +++ b/drivers/mtd/nand/raw/ingenic/Makefile
>> >> @@ -1,3 +1,3 @@
>> >> obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
>> >> obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o
>> jz4780_bch_common.o
>> >> \
>> >> - jz4780_bch.o jz4725b_bch.o
>> >> + jz4780_bch.o jz4725b_bch.o jz4740_bch.o
>> >
>> > I still don't see the point of the jz4780_bch_common/jz47xxx_bch
>> > separation. You seem to always embed all objects anyway, so you
>> can
>> > just put the code for both engines in the same source file and
>> decide
>> > which one to use based on the compat (which you already do
>> anyway).
>>
>> Each SoC has a different set of registers for the BCH hardware. I
>> can
>> try to
>> cram everything into one file, but it won't be that much cleaner.
>
> Then maybe they deserve separate drivers/modules.
>
> BTW, didn't you say that one IP uses Reed-Salomon instead of BCH. I'd
> suggest prefixing structs and functions with jz47xx_ecc instead of
> jz47xx_bch and naming the common part jz47xx_ecc.c to reflect that.

Would it be a good idea to make a generic ECC API that the jz47xx_nand
driver could use? Then the three jz47xx BCH codepaths could be separate
drivers that register with the generic ECC core.

\
 
 \ /
  Last update: 2019-02-03 15:57    [W:0.090 / U:2.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site