lkml.org 
[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/3] nvmem: zynqmp: Added zynqmp nvmem firmware driver
From
Date


On 04/02/2019 07:09, Nava kishore Manne wrote:
>
> -config SC27XX_EFUSE
> - tristate "Spreadtrum SC27XX eFuse Support"
> - depends on MFD_SC27XX_PMIC || COMPILE_TEST
> - depends on HAS_IOMEM

Why are you removing SC27XX_EFUSE support here?

It does not look right!

> +config NVMEM_ZYNQMP
> + bool "Xilinx ZYNQMP SoC nvmem firmware support"
> + depends on ARCH_ZYNQMP
> help
> - This is a simple driver to dump specified values of Spreadtrum
> - SC27XX PMICs from eFuse.
> + This is a driver to access hardware related data like
> + soc revision, IDCODE... etc by using the firmware
> + interface.
>
> - This driver can also be built as a module. If so, the module
> - will be called nvmem-sc27xx-efuse.
> + If sure, say yes. If unsure, say no.
>
> endif
> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> index 4e8c61628f1a..0b3abd7f5d02 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -39,5 +39,6 @@ obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o
> nvmem_snvs_lpgpr-y := snvs_lpgpr.o
> obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
> nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o
> -obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o
> -nvmem-sc27xx-efuse-y := sc27xx-efuse.o

same here?

> +obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
> +nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
> +

--srini

\
 
 \ /
  Last update: 2019-02-03 10:39    [W:0.085 / U:3.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site