[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 3.16 049/305] iio: adc: at91: fix wrong channel number in triggered buffer mode
3.16.63-rc1 review patch.  If anyone has any objections, please let me know.


From: Eugen Hristev <>

commit aea835f2dc8a682942b859179c49ad1841a6c8b9 upstream.

When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <>
Signed-off-by: Eugen Hristev <>
Acked-by: Ludovic Desroches <>
Signed-off-by: Jonathan Cameron <>
Signed-off-by: Ben Hutchings <>
drivers/iio/adc/at91_adc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -245,12 +245,14 @@ static irqreturn_t at91_adc_trigger_hand
struct iio_poll_func *pf = p;
struct iio_dev *idev = pf->indio_dev;
struct at91_adc_state *st = iio_priv(idev);
+ struct iio_chan_spec const *chan;
int i, j = 0;

for (i = 0; i < idev->masklength; i++) {
if (!test_bit(i, idev->active_scan_mask))
- st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i));
+ chan = idev->channels + i;
+ st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, chan->channel));

 \ /
  Last update: 2019-02-03 15:29    [W:0.844 / U:2.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site