lkml.org 
[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 9/9] mtd: rawnand: jz4780-bch: Add support for the JZ4740


Le dim. 3 févr. 2019 à 4:35, Boris Brezillon <bbrezillon@kernel.org>
a écrit :
> On Sat, 2 Feb 2019 20:19:26 -0300
> Paul Cercueil <paul@crapouillou.net> wrote:
>
>> Add the backend code for the jz4780-bch driver to support the JZ4740
>> SoC from Ingenic.
>>
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>>
>> Changes:
>>
>> v2: New patch
>>
>> drivers/mtd/nand/raw/ingenic/Makefile | 2 +-
>> drivers/mtd/nand/raw/ingenic/jz4740_bch.c | 173
>> ++++++++++++++++++
>> .../mtd/nand/raw/ingenic/jz4780_bch_common.c | 1 +
>> .../nand/raw/ingenic/jz4780_bch_internal.h | 1 +
>> 4 files changed, 176 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/mtd/nand/raw/ingenic/jz4740_bch.c
>>
>> diff --git a/drivers/mtd/nand/raw/ingenic/Makefile
>> b/drivers/mtd/nand/raw/ingenic/Makefile
>> index f38b467490cf..d16c96113a93 100644
>> --- a/drivers/mtd/nand/raw/ingenic/Makefile
>> +++ b/drivers/mtd/nand/raw/ingenic/Makefile
>> @@ -1,3 +1,3 @@
>> obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
>> obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch_common.o
>> \
>> - jz4780_bch.o jz4725b_bch.o
>> + jz4780_bch.o jz4725b_bch.o jz4740_bch.o
>
> I still don't see the point of the jz4780_bch_common/jz47xxx_bch
> separation. You seem to always embed all objects anyway, so you can
> just put the code for both engines in the same source file and decide
> which one to use based on the compat (which you already do anyway).

Each SoC has a different set of registers for the BCH hardware. I can
try to
cram everything into one file, but it won't be that much cleaner.

>> diff --git a/drivers/mtd/nand/raw/ingenic/jz4740_bch.c
>> b/drivers/mtd/nand/raw/ingenic/jz4740_bch.c
>> new file mode 100644
>> index 000000000000..61ea109cee9d
>> --- /dev/null
>> +++ b/drivers/mtd/nand/raw/ingenic/jz4740_bch.c
>> @@ -0,0 +1,173 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * JZ4740 backend code for the jz4780-bch driver
>> + * based on jz4740-nand.c
>> + *
>> + * Copyright (c) 2019 Paul Cercueil <paul@crapouillou.net>
>> + */
>> +
>> +#include <linux/bitops.h>
>> +#include <linux/device.h>
>> +
>> +#include "jz4780_bch.h"
>> +#include "jz4780_bch_internal.h"
>> +
>> +#define JZ_REG_NAND_ECC_CTRL 0x00
>> +#define JZ_REG_NAND_DATA 0x04
>> +#define JZ_REG_NAND_PAR0 0x08
>> +#define JZ_REG_NAND_PAR1 0x0C
>> +#define JZ_REG_NAND_PAR2 0x10
>> +#define JZ_REG_NAND_IRQ_STAT 0x14
>> +#define JZ_REG_NAND_IRQ_CTRL 0x18
>> +#define JZ_REG_NAND_ERR(x) (0x1C + ((x) << 2))
>> +
>> +#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
>> +#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
>> +#define JZ_NAND_ECC_CTRL_RS BIT(2)
>> +#define JZ_NAND_ECC_CTRL_RESET BIT(1)
>> +#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
>> +
>> +#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
>> +#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
>> +#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
>> +#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
>> +#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
>> +#define JZ_NAND_STATUS_ERROR BIT(0)
>> +
>> +static const uint8_t empty_block_ecc[] = {
>> + 0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f
>> +};
>> +
>> +static void jz4740_bch_init(struct jz4780_bch *bch, bool encode)
>> +{
>> + uint32_t reg;
>> +
>> + /* Clear interrupt status */
>> + writel(0, bch->base + JZ_REG_NAND_IRQ_STAT);
>> +
>> + /* Initialize and enable BCH */
>> + reg = readl(bch->base + JZ_REG_NAND_ECC_CTRL);
>> + reg |= JZ_NAND_ECC_CTRL_RESET;
>> + reg |= JZ_NAND_ECC_CTRL_ENABLE;
>> + reg |= JZ_NAND_ECC_CTRL_RS;
>> + if (encode)
>> + reg |= JZ_NAND_ECC_CTRL_ENCODING;
>> + else
>> + reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
>> +
>> + writel(reg, bch->base + JZ_REG_NAND_ECC_CTRL);
>> +}
>> +
>> +static int jz4740_bch_calculate(struct jz4780_bch *bch,
>> + struct jz4780_bch_params *params,
>> + const u8 *buf, u8 *ecc_code)
>> +{
>> + uint32_t reg, status;
>> + unsigned int timeout = 1000;
>> + int i;
>> +
>> + jz4740_bch_init(bch, true);
>> +
>> + do {
>> + status = readl(bch->base + JZ_REG_NAND_IRQ_STAT);
>> + } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
>> +
>> + if (timeout == 0)
>> + return -ETIMEDOUT;
>> +
>> + reg = readl(bch->base + JZ_REG_NAND_ECC_CTRL);
>> + reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
>> + writel(reg, bch->base + JZ_REG_NAND_ECC_CTRL);
>> +
>> + for (i = 0; i < params->bytes; ++i)
>> + ecc_code[i] = readb(bch->base + JZ_REG_NAND_PAR0 + i);
>> +
>> + /* If the written data is completely 0xff, we also want to write
>> 0xff as
>> + * ecc, otherwise we will get in trouble when doing subpage
>> writes.
>> + */
>> + if (memcmp(ecc_code, empty_block_ecc,
>> ARRAY_SIZE(empty_block_ecc)) == 0)
>> + memset(ecc_code, 0xff, ARRAY_SIZE(empty_block_ecc));
>> +
>> + return 0;
>> +}
>> +
>> +static void jz_nand_correct_data(uint8_t *buf, int index, int mask)
>> +{
>> + int offset = index & 0x7;
>> + uint16_t data;
>> +
>> + index += (index >> 3);
>> +
>> + data = buf[index];
>> + data |= buf[index + 1] << 8;
>> +
>> + mask ^= (data >> offset) & 0x1ff;
>> + data &= ~(0x1ff << offset);
>> + data |= (mask << offset);
>> +
>> + buf[index] = data & 0xff;
>> + buf[index + 1] = (data >> 8) & 0xff;
>> +}
>> +
>> +static int jz4740_bch_correct(struct jz4780_bch *bch,
>> + struct jz4780_bch_params *params,
>> + u8 *buf, u8 *ecc_code)
>> +{
>> + int i, error_count, index;
>> + uint32_t reg, status, error;
>> + unsigned int timeout = 1000;
>> +
>> + jz4740_bch_init(bch, false);
>> +
>> + for (i = 0; i < params->bytes; ++i)
>> + writeb(ecc_code[i], bch->base + JZ_REG_NAND_PAR0 + i);
>> +
>> + reg = readl(bch->base + JZ_REG_NAND_ECC_CTRL);
>> + reg |= JZ_NAND_ECC_CTRL_PAR_READY;
>> + writel(reg, bch->base + JZ_REG_NAND_ECC_CTRL);
>> +
>> + do {
>> + status = readl(bch->base + JZ_REG_NAND_IRQ_STAT);
>> + } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
>> +
>> + if (timeout == 0)
>> + return -ETIMEDOUT;
>> +
>> + reg = readl(bch->base + JZ_REG_NAND_ECC_CTRL);
>> + reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
>> + writel(reg, bch->base + JZ_REG_NAND_ECC_CTRL);
>> +
>> + if (status & JZ_NAND_STATUS_ERROR) {
>> + if (status & JZ_NAND_STATUS_UNCOR_ERROR)
>> + return -EBADMSG;
>> +
>> + error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
>> +
>> + for (i = 0; i < error_count; ++i) {
>> + error = readl(bch->base + JZ_REG_NAND_ERR(i));
>> + index = ((error >> 16) & 0x1ff) - 1;
>> + if (index >= 0 && index < params->size)
>> + jz_nand_correct_data(buf, index, error & 0x1ff);
>> + }
>> +
>> + return error_count;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void jz4740_bch_disable(struct jz4780_bch *bch)
>> +{
>> + u32 reg;
>> +
>> + writel(0, bch->base + JZ_REG_NAND_IRQ_STAT);
>> + reg = readl(bch->base + JZ_REG_NAND_ECC_CTRL);
>> + reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
>> + writel(reg, bch->base + JZ_REG_NAND_ECC_CTRL);
>> +}
>> +
>> +const struct jz4780_bch_ops jz4780_bch_jz4740_ops = {
>> + .disable = jz4740_bch_disable,
>> + .calculate = jz4740_bch_calculate,
>> + .correct = jz4740_bch_correct,
>> +};
>> diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch_common.c
>> b/drivers/mtd/nand/raw/ingenic/jz4780_bch_common.c
>> index f505816193a8..c2326286abb2 100644
>> --- a/drivers/mtd/nand/raw/ingenic/jz4780_bch_common.c
>> +++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch_common.c
>> @@ -157,6 +157,7 @@ static int jz4780_bch_probe(struct
>> platform_device *pdev)
>> }
>>
>> static const struct of_device_id jz4780_bch_dt_match[] = {
>> + { .compatible = "ingenic,jz4740-bch", .data =
>> &jz4780_bch_jz4740_ops},
>> { .compatible = "ingenic,jz4725b-bch", .data =
>> &jz4780_bch_jz4725b_ops},
>> { .compatible = "ingenic,jz4780-bch", .data =
>> &jz4780_bch_jz4780_ops },
>> {},
>> diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch_internal.h
>> b/drivers/mtd/nand/raw/ingenic/jz4780_bch_internal.h
>> index 462aded811b1..7909a49c57db 100644
>> --- a/drivers/mtd/nand/raw/ingenic/jz4780_bch_internal.h
>> +++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch_internal.h
>> @@ -30,6 +30,7 @@ struct jz4780_bch {
>> struct mutex lock;
>> };
>>
>> +extern const struct jz4780_bch_ops jz4780_bch_jz4740_ops;
>> extern const struct jz4780_bch_ops jz4780_bch_jz4725b_ops;
>> extern const struct jz4780_bch_ops jz4780_bch_jz4780_ops;
>>
>

\
 
 \ /
  Last update: 2019-02-03 14:59    [W:0.104 / U:3.952 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site