lkml.org 
[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.16 269/305] xhci: Prevent U1/U2 link pm states if exit latency is too long
3.16.63-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 0472bf06c6fd33c1a18aaead4c8f91e5a03d8d7b upstream.

Don't allow USB3 U1 or U2 if the latency to wake up from the U-state
reaches the service interval for a periodic endpoint.

This is according to xhci 1.1 specification section 4.23.5.2 extra note:

"Software shall ensure that a device is prevented from entering a U-state
where its worst case exit latency approaches the ESIT."

Allowing too long exit latencies for periodic endpoint confuses xHC
internal scheduling, and new devices may fail to enumerate with a
"Not enough bandwidth for new device state" error from the host.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.16: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/host/xhci.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4466,9 +4466,25 @@ static u16 xhci_call_host_update_timeout
u16 *timeout)
{
if (state == USB3_LPM_U1) {
+ /* Prevent U1 if service interval is shorter than U1 exit latency */
+ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+ if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+ dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
+ return USB3_LPM_DISABLED;
+ }
+ }
+
if (xhci->quirks & XHCI_INTEL_HOST)
return xhci_calculate_intel_u1_timeout(udev, desc);
} else {
+ /* Prevent U2 if service interval is shorter than U2 exit latency */
+ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+ if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+ dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
+ return USB3_LPM_DISABLED;
+ }
+ }
+
if (xhci->quirks & XHCI_INTEL_HOST)
return xhci_calculate_intel_u2_timeout(udev, desc);
}
\
 
 \ /
  Last update: 2019-02-03 14:55    [W:0.873 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site