lkml.org 
[lkml]   [2019]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] dt-bindings: net: can: binding for CTU CAN FD open-source IP core.
Date
On 2/22/19 2:20 PM, Pavel Pisa wrote:
> From 3e19a7f5c33e5fb50f52c9df05bf00022e3f3dd5 Mon Sep 17 00:00:00 2001
> From: Pavel Pisa <pisa@cmp.felk.cvut.cz>
> Date: Fri, 22 Feb 2019 14:11:11 +0100
> Subject: [PATCH] dt-bindings: net: can: binding for CTU CAN FD open-source IP
> core.

Nice! I appreciate open-source hardware!

Please send the patch via git send-email, it's a bit broken:

Applying: dt-bindings: net: can: binding for CTU CAN FD open-source IP core.
.git/rebase-apply/patch:29: trailing whitespace.

error: corrupt patch at line 30
Patch failed at 0001 dt-bindings: net: can: binding for CTU CAN FD
open-source IP core.
hint: Use 'git am --show-current-patch' to see the failed patch


> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
> ---
> .../devicetree/bindings/net/can/ctu,ctucanfd.txt | 102 +++++++++++++++++++++
> 1 file changed, 102 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
>
> diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
> b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
> new file mode 100644
> index 000000000000..6c75e5850904
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
> @@ -0,0 +1,102 @@
> +Memory mapped CTU CAN FD open-source IP core
> +
> +The core sources and documentation on project page
> +
> + https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
> + http://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/Progdokum.pdf
> +
> +Integration in Xilinx Zynq SoC based system together with
> +OpenCores SJA1000 compatible controllers
> +
> + https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top
> +
> +Martin Jerabek's dimploma thesis with integration and testing
> +framework description
> +
> +
> https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf
> +
> +Required properties:
> +
> +- compatible : should be one of "ctu,ctucanfd", "ctu,canfd-2".
> +
> +- reg = <(baseaddr) (size)> : specify mapping into physical address
> + space of the processor system.
> +
> +- interrupts : property with a value describing the interrupt source
> + required for the CTU CAN FD. For Zynq SoC system format is
> + <(is_spi) (number) (type)> where is_spi defines if it is SPI
> + (shared peripheral) interrupt, the second number is translated
> + to the vector by addition of 32 on Zynq-7000 systems and type
> + is IRQ_TYPE_LEVEL_HIGH (4) for Zynq.
> +
> +- interrupt-parent = <&interrupt-controller-phandle> :
> + is required for Zynq SoC to find map interrupt
> + to the correct controller
> +
> +- clocks: phandle of reference clock (100 MHz is appropriate
> + for FPGA implementation on Zynq-7000 system).
> +
> +Example when integrated to Zynq-7000 system DTS:
> +
> + / {
> + /* ... */
> + amba: amba {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + CTU_CAN_FD_0: CTU_CAN_FD@43c30000 {

It's unusual to have uppercase letters here.

> + compatible = "ctu,ctucanfd";

Is ctu already registered in
Documentation/devicetree/bindings/vendor-prefixes.txt ?

> + interrupt-parent = <&intc>;
> + interrupts = <0 30 4>;
> + clocks = <&clkc 15>;
> + reg = <0x43c30000 0x10000>;
> + };
> + };
> + };
> +
> +
> +Example when used as DTS overlay on Zynq-7000 system:
> +
> +
> +// Device Tree Example: Full Reconfiguration without Bridges
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target-path = "/fpga-full";
> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + firmware-name = "system.bit.bin";
> + };
> + };
> +
> + fragment@1 {
> + target-path = "/amba";
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + CTU_CAN_FD_0: CTU_CAN_FD@43c30000 {
> + compatible = "ctu,ctucanfd";
> + interrupt-parent = <&intc>;
> + interrupts = <0 30 4>;
> + clocks = <&clkc 15>;
> + //clock-names = "can_clk";

Is this needed or not?

> + reg = <0x43c30000 0x10000>;
> + };
> + CTU_CAN_FD_1: CTU_CAN_FD@43c70000 {
> + compatible = "ctu,ctucanfd";
> + interrupt-parent = <&intc>;
> + interrupts = <0 31 4>;
> + clocks = <&clkc 15>;
> + //clock-names = "can_clk";

Is this needed or not?

> + reg = <0x43c70000 0x10000>;
> + };
> + };
> + };
> +};
>

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-02-27 15:48    [W:0.035 / U:7.448 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site