lkml.org 
[lkml]   [2019]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 04/13] iommu/mediatek: Add device_link between the consumer and the larb devices
From
Date
On Mon, 2019-02-25 at 15:54 -0800, Evan Green wrote:
> On Mon, Dec 31, 2018 at 8:52 PM Yong Wu <yong.wu@mediatek.com> wrote:
> >
> > MediaTek IOMMU don't have its power-domain. all the consumer connect
> > with smi-larb, then connect with smi-common.
> >
> > M4U
> > |
> > smi-common
> > |
> > -------------
> > | | ...
> > | |
> > larb1 larb2
> > | |
> > vdec venc
> >
> > When the consumer works, it should enable the smi-larb's power which
> > also need enable the smi-common's power firstly.
> >
> > Thus, First of all, use the device link connect the consumer and the
> > smi-larbs. then add device link between the smi-larb and smi-common.
> >
> > This patch adds device_link between the consumer and the larbs.
> >
> > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> > drivers/iommu/mtk_iommu.c | 15 +++++++++++++--
> > drivers/iommu/mtk_iommu_v1.c | 14 ++++++++++++--
> > 2 files changed, 25 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 202e41b..735ae8d 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -247,6 +247,7 @@ static void mtk_iommu_config(struct mtk_iommu_data *data,
> > struct mtk_smi_larb_iommu *larb_mmu;
> > unsigned int larbid, portid;
> > struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > + struct device_link *link;
> > int i;
> >
> > for (i = 0; i < fwspec->num_ids; ++i) {
> > @@ -257,10 +258,20 @@ static void mtk_iommu_config(struct mtk_iommu_data *data,
> > dev_dbg(dev, "%s iommu port: %d\n",
> > enable ? "enable" : "disable", portid);
> >
> > - if (enable)
> > + if (enable) {
> > larb_mmu->mmu |= MTK_SMI_MMU_EN(portid);
> > - else
> > + /* Link the consumer with the larb device(supplier) */
> > + link = device_link_add(dev, larb_mmu->dev,
> > + DL_FLAG_PM_RUNTIME |
> > + DL_FLAG_AUTOREMOVE_CONSUMER);
> > + if (!link) {
> > + dev_err(dev, "Unable to link %s\n",
> > + dev_name(larb_mmu->dev));
> > + return;
>
> The return is a little odd here, given that you don't return an error
> and this function doesn't do anything else. If it's non-fatal that
> this link didn't get set up, then remove the return. If it is fatal,
> then return an error code.

I will remove the "return". Thanks.

>
> > + }
> > + } else {
> > larb_mmu->mmu &= ~MTK_SMI_MMU_EN(portid);
> > + }
> > }
> > }
> >
> > diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
> > index 9386aee..022bad9 100644
> > --- a/drivers/iommu/mtk_iommu_v1.c
> > +++ b/drivers/iommu/mtk_iommu_v1.c
> > @@ -201,6 +201,7 @@ static void mtk_iommu_config(struct mtk_iommu_data *data,
> > struct mtk_smi_larb_iommu *larb_mmu;
> > unsigned int larbid, portid;
> > struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> > + struct device_link *link;
> > int i;
> >
> > for (i = 0; i < fwspec->num_ids; ++i) {
> > @@ -211,10 +212,19 @@ static void mtk_iommu_config(struct mtk_iommu_data *data,
> > dev_dbg(dev, "%s iommu port: %d\n",
> > enable ? "enable" : "disable", portid);
> >
> > - if (enable)
> > + if (enable) {
> > larb_mmu->mmu |= MTK_SMI_MMU_EN(portid);
> > - else
> > + link = device_link_add(dev, larb_mmu->dev,
> > + DL_FLAG_PM_RUNTIME |
> > + DL_FLAG_AUTOREMOVE_CONSUMER);
> > + if (!link) {
> > + dev_err(dev, "Unable to link %s\n",
> > + dev_name(larb_mmu->dev));
> > + return;
>
> Same for this one.
>
> > + }
> > + } else {
> > larb_mmu->mmu &= ~MTK_SMI_MMU_EN(portid);
> > + }
> > }
> > }
> >
> > --
> > 1.9.1
> >
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek


\
 
 \ /
  Last update: 2019-02-27 15:35    [W:0.069 / U:6.104 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site