lkml.org 
[lkml]   [2019]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 05/13] memory: mtk-smi: Add device-link between smi-larb and smi-common
From
Date
On Mon, 2019-02-25 at 15:54 -0800, Evan Green wrote:
> On Mon, Dec 31, 2018 at 8:52 PM Yong Wu <yong.wu@mediatek.com> wrote:
> >
> > Normally, If the smi-larb HW need work, we should enable the smi-common
> > HW power and clock firstly.
> > This patch adds device-link between the smi-larb dev and the smi-common
> > dev. then If pm_runtime_get_sync(smi-larb-dev), the pm_runtime_get_sync
> > (smi-common-dev) will be called automatically.
> >
> > Since smi is built-in driver like IOMMU and never unbound,
> > DL_FLAG_AUTOREMOVE_* is not needed.
> >
> > CC: Matthias Brugger <matthias.bgg@gmail.com>
> > Suggested-by: Tomasz Figa <tfiga@chromium.org>
> > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > ---
> > drivers/memory/mtk-smi.c | 16 +++++++---------
> > 1 file changed, 7 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> > index 9688341..30930e4 100644
> > --- a/drivers/memory/mtk-smi.c
> > +++ b/drivers/memory/mtk-smi.c
> > @@ -271,6 +271,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
> > struct device *dev = &pdev->dev;
> > struct device_node *smi_node;
> > struct platform_device *smi_pdev;
> > + struct device_link *link;
> >
> > larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
> > if (!larb)
> > @@ -310,6 +311,12 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
> > if (!platform_get_drvdata(smi_pdev))
> > return -EPROBE_DEFER;
> > larb->smi_common_dev = &smi_pdev->dev;
> > + link = device_link_add(dev, larb->smi_common_dev,
> > + DL_FLAG_PM_RUNTIME);
>
> Doesn't this need to be torn down in remove()? You mention that it's
> built-in and never removed, but it does seem to have a remove()

The MTK IOMMU driver need depend on this SMI driver. the IOMMU is a
builtin driver, thus the SMI also should be a builtin driver.

Technically, If the driver is builtin, then the "remove" function can be
removed? If yes, I could use a new patch do it.

It looks the MACRO(builtin_platform_driver) only support one driver, but
we have two driver(smi-common and smi-larb) here.

> function that tears down everything else, so it seemed a shame to
> start leaking now. Maybe the AUTOREMOVE flag would do it.


\
 
 \ /
  Last update: 2019-02-27 15:34    [W:0.082 / U:7.120 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site