lkml.org 
[lkml]   [2019]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 0/3] Bluetooth: hci_qca: Add delay after power-off pulse
On Tue, Feb 26, 2019 at 11:47 AM Matthias Kaehlcke <mka@chromium.org> wrote:
>
> Initialization of the QCA WCN3990 often fails at boot time:
>
> [ 15.205224] Bluetooth: hci0: setting up wcn3990
> [ 17.341062] Bluetooth: hci0: command 0xfc00 tx timeout
> [ 22.101453] ERROR: Bluetooth initialization failed
> [ 25.337740] Bluetooth: hci0: Reading QCA version information failed (-110)
>
> A short delay after sending a power-off pulse (which is done immediately
> before sending a power-on pulse) fixes this.
>
> Also move the delays to qca_send_power_pulse(), since they are directly
> related with sending the pulses. Change the interface of
> qca_send_power_pulse() to receive a boolean instead of a power pulse
> command, this improves readability of the function with the delays
> added.
>

For the series:

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Matthias Kaehlcke (3):
> Bluetooth: hci_qca: Pass boolean 'on/off' to qca_send_power_pulse()
> Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse()
> Bluetooth: hci_qca: Add delay after power-off pulse
>
> drivers/bluetooth/hci_qca.c | 21 +++++++++++----------
> 1 file changed, 11 insertions(+), 10 deletions(-)
>
> --
> 2.21.0.rc2.261.ga7da99ff1b-goog
>

\
 
 \ /
  Last update: 2019-02-27 07:33    [W:0.052 / U:2.272 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site