lkml.org 
[lkml]   [2019]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] ARM: dts: stm32: enable domains controller node on stm32mp157c-ed1
Date
Enable ETZPC and set configuration for CEC node

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 063ee8ac5dcb..29142ca3d685 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -6,6 +6,7 @@
/dts-v1/;

#include "stm32mp157c-ed1.dts"
+#include <dt-bindings/bus/domains/stm32-etzpc.h>
#include <dt-bindings/gpio/gpio.h>

/ {
@@ -32,6 +33,7 @@
&cec {
pinctrl-names = "default";
pinctrl-0 = <&cec_pins_a>;
+ domainctrl-0 = <&etzpc STM32_ETZPC_CEC STM32_ETZPC_NON_SECURE>;
status = "okay";
};

--
2.15.0
\
 
 \ /
  Last update: 2019-02-27 13:13    [W:0.036 / U:8.836 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site