lkml.org 
[lkml]   [2019]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/4] mwifiex PCI/wake-up interrupt fixes
From
Date
+ Lorenzo

Hi Brian,

On 26/02/2019 23:28, Brian Norris wrote:
> + others
>
> Hi Marc,
>
> Thanks for the series. I have a few bits of history to add to this, and
> some comments.
>
> On Sun, Feb 24, 2019 at 02:04:22PM +0000, Marc Zyngier wrote:
>> For quite some time, I wondered why the PCI mwifiex device built in my
>> Chromebook was unable to use the good old legacy interrupts. But as MSIs
>> were working fine, I never really bothered investigating. I finally had a
>> look, and the result isn't very pretty.
>>
>> On this machine (rk3399-based kevin), the wake-up interrupt is described as
>> such:
>>
>> &pci_rootport {
>> mvl_wifi: wifi@0,0 {
>> compatible = "pci1b4b,2b42";
>> reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
>> 0x83010000 0x0 0x00100000 0x0 0x00100000>;
>> interrupt-parent = <&gpio0>;
>> interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&wlan_host_wake_l>;
>> wakeup-source;
>> };
>> };
>>
>> Note how the interrupt is part of the properties directly attached to the
>> PCI node. And yet, this interrupt has nothing to do with a PCI legacy
>> interrupt, as it is attached to the wake-up widget that bypasses the PCIe RC
>> altogether (Yay for the broken design!). This is in total violation of the
>> IEEE Std 1275-1994 spec[1], which clearly documents that such interrupt
>> specifiers describe the PCI device interrupts, and must obey the
>> INT-{A,B,C,D} mapping. Oops!
>
> You're not the first person to notice this. All the motivations are not
> necessarily painted clearly in their cover letter, but here are some
> previous attempts at solving this problem:
>
> [RFC PATCH v11 0/5] PCI: rockchip: Move PCIe WAKE# handling into pci core
> https://lkml.kernel.org/lkml/20171225114742.18920-1-jeffy.chen@rock-chips.com/
> http://lkml.kernel.org/lkml/20171226023646.17722-1-jeffy.chen@rock-chips.com/
>
> As you can see by the 12th iteration, it wasn't left unsolved for lack
> of trying...

I wasn't aware of this. That's definitely a better approach than my
hack, and I would really like this to be revived.

>
> Frankly, if a proper DT replacement to the admittedly bad binding isn't
> agreed upon quickly, I'd be very happy to just have WAKE# support
> removed from the DTS for now, and the existing mwifiex binding should
> just be removed. (Wake-on-WiFi was never properly vetted on these
> platforms anyway.) It mostly serves to just cause problems like you've
> noticed.

Agreed. If there is no actual use for this, and that we can build a case
for a better solution, let's remove the wakeup support from the Gru DT
(it is invalid anyway), and bring it back if and when we get the right
level of support.

[...]

> One problem Rockchip authors were also trying to resolve here is that
> PCIe WAKE# handling should not really be something the PCI device driver
> has to handle directly. Despite your complaints about not using in-band
> TLP wakeup, a separate WAKE# pin is in fact a documented part of the
> PCIe standard, and it so happens that the Rockchip RC does not support
> handling TLPs in S3, if you want to have decent power consumption. (Your
> "bad hardware" complaints could justifiably fall here, I suppose.)
>
> Additionally, I've had pushback from PCI driver authors/maintainers on
> adding more special handling for this sort of interrupt property (not
> the binding specifically, but just the concept of handling WAKE# in the
> driver), as they claim this should be handled by the system firmware,
> when they set the appropriate wakeup flags, which filter down to
> __pci_enable_wake() -> platform_pci_set_wakeup(). That's how x86 systems
> do it (note: I know for a fact that many have a very similar
> architecture -- WAKE# is not routed to the RC, because, why does it need
> to? and they *don't* use TLP wakeup either -- they just hide it in
> firmware better), and it Just Works.

Even on an arm64 platform, there is no reason why a wakeup interrupt
couldn't be handled by FW rather than the OS. It just need to be wired
to the right spot (so that it generates a secure interrupt that can be
handled by FW).

> So, we basically concluded that we should standardize on a way to
> describe WAKE# interrupts such that PCI drivers don't have to deal with
> it at all, and the PCI core can do it for us. 12 revisions later
> and...we still never agreed on a good device tree binding for this.

Is the DT binding the only problem? Do we have an agreement for the core
code?

> IOW, maybe your wake-up sub-node is the best way to side-step the
> problems of conflicting with the OF PCI spec. But I'd still really like
> to avoid parsing it in mwifiex, if at all possible.

Honestly, my solution is just a terrible hack. I wasn't aware that this
was a more general problem, and I'd love it to be addressed in the core
PCI code.

> (We'd still be left with the marvell,wakeup-pin propery to parse
> specifically in mwifiex, which sadly has to exist because....well,
> Samsung decided to do chip-on-board, and then they failed to use the
> correct pin on Marvell's side when wiring up WAKE#. Sigh.)

Oh well...

Thanks,

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2019-02-27 11:03    [W:0.146 / U:7.016 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site