lkml.org 
[lkml]   [2019]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/8] add power management support for SAM9X60
On 14/02/2019 15:54:26+0000, Claudiu.Beznea@microchip.com wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> Hi,
>
> This series add power management support for SAM9X60. The following
> platform specific power management modes were enabled for it:
> Idle, ULP0 and ULP1.
>
> Thank you,
> Claudiu Beznea
>
> Claudiu Beznea (8):
> ARM: at91: pm: introduce at91_soc_pm structure
> dt-bindings: arm: atmel: add binding for SAM9X60 SoC
> ARM: at91: pm: initial PM support for SAM9X60
> ARM: at91: pm: keep at91_pm_backup_init() only for SAMA5D2 SoCs
> ARM: at91: pm: add support for per SoC wakeup source configuration
> ARM: at91: pm: add ULP1 support for SAM9X60
> ARM: at91: pm: disable RC oscillator in ULP0
> ARM: at91: pm: do not disable/enable PLLA for ULP modes
>

All applied.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2019-02-25 11:46    [W:0.093 / U:2.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site