[lkml]   [2019]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net-next v2 3/7] net: phy: marvell10g: Use 2500BASEX when using 2.5GBASET
On Sat, Feb 23, 2019 at 12:37:40AM +0100, Maxime Chevallier wrote:
> The Marvell Alaska family of PHYs supports 2.5GBaseT and 5GBaseT modes,
> as defined in the 802.3bz specification.
> Upon establishing a 2.5GBASET link, the PHY will reconfigure it's MII
> interface to 2500BASEX.
> At 5G, the PHY will reconfigure it's interface to 5GBASE-R, but this
> mode isn't supported by any MAC for now.
> This was tested with :
> - The 88X3310, which is on the MacchiatoBin
> - The 88E2010, an Alaska PHY that has no fiber interfaces, and is
> limited to 5G maximum speed.
> Signed-off-by: Maxime Chevallier <>

Reviewed-by: Andrew Lunn <>


 \ /
  Last update: 2019-02-23 20:31    [W:0.140 / U:2.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site