lkml.org 
[lkml]   [2019]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next v2 0/7] net: phy: marvell10g: Add 2.5GBaseT support
Date
This series adds the missing bits necessary to fully support 2.5GBaseT
in the Marvell Alaska PHYs.

The main points for that support are :

- Making use of the .get_features call, recently introduced by Heiner
and Andrew, that allows having a fully populated list of supported
modes, including 2500BaseT.

- Configuring the MII to 2500BaseX when establishing a link at 2.5G

- Adding a small quirk to take into account the fact that some PHYs in
the family won't report the correct supported abilities

The rest of the series consists of small cosmetic improvements such as
using the correct helper to set a linkmode bit and adding macros for the
PHY ids.

We also add support for the 88E2110 PHY, which doesn't require the
quirk, and support for 2500BaseT in the PPv2 driver, in order to have a
fully working setup on the MacchiatoBin board.

Changes since V1 : Fixed formatting issue in patch 01, rebased.

Maxime Chevallier (7):
net: phy: marvell10g: Use get_features to get the PHY abilities
net: phy: marvell10g: Use linkmode_set_bit helper instead of __set_bit
net: phy: marvell10g: Use 2500BASEX when using 2.5GBASET
net: phy: marvell10g: Use a #define for 88X3310 family id
net: phy: marvell10g: Force reading of 2.5/5G
net: mvpp2: Add 2.5GBaseT support
net: phy: marvell10g: add support for the 88x2110 PHY

.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 +
drivers/net/phy/marvell10g.c | 93 ++++++++++++++++---
include/linux/marvell_phy.h | 2 +
3 files changed, 82 insertions(+), 14 deletions(-)

--
2.19.2

\
 
 \ /
  Last update: 2019-02-23 00:38    [W:0.083 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site