lkml.org 
[lkml]   [2019]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] iio:adc:ad7923: Use BIT macro instead of bitshift
Date
Replace use of the operation '<<' by the BIT macro. Solves checkpath.pl's
message:

CHECK: Prefer using the BIT macro

Signed-off-by: Bárbara Fernandes <barbara.fernandes@usp.br>
---
drivers/iio/adc/ad7923.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c
index ebae7522710a..b39ea834cdd6 100644
--- a/drivers/iio/adc/ad7923.c
+++ b/drivers/iio/adc/ad7923.c
@@ -24,9 +24,9 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>

-#define AD7923_WRITE_CR (1 << 11) /* write control register */
-#define AD7923_RANGE (1 << 1) /* range to REFin */
-#define AD7923_CODING (1 << 0) /* coding is straight binary */
+#define AD7923_WRITE_CR BIT(11) /* write control register */
+#define AD7923_RANGE BIT(1) /* range to REFin */
+#define AD7923_CODING BIT(0) /* coding is straight binary */
#define AD7923_PM_MODE_AS (1) /* auto shutdown */
#define AD7923_PM_MODE_FS (2) /* full shutdown */
#define AD7923_PM_MODE_OPS (3) /* normal operation */
--
2.17.1
\
 
 \ /
  Last update: 2019-02-22 21:33    [W:0.075 / U:1.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site