lkml.org 
[lkml]   [2019]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] iio: adc: add NPCM ADC driver
On Mon, 28 Jan 2019 12:53:18 +0200
Tomer Maimon <tmaimon77@gmail.com> wrote:

> Hi Jonathan,
>
> Thanks for the clarification,
>
> I will like to to Modify the NPCM ADC dt-binding document (
> https://patchwork.ozlabs.org/patch/1022527/ - removing rst node).
>
> To send a new commit to the iio.git testing branch or to send a new patch
> version?
New commit is good at this point.

Thanks,

Jonathan

>
> Thanks,
>
> Tomer
>
> On Sat, 26 Jan 2019 at 19:32, Jonathan Cameron <jic23@kernel.org> wrote:
>
> > On Sun, 20 Jan 2019 17:05:38 +0200
> > Tomer Maimon <tmaimon77@gmail.com> wrote:
> >
> > > Hi Jonathan,
> > >
> > > Thanks a lot for reviewing our driver,
> > >
> > > On Sat, 19 Jan 2019 at 20:08, Jonathan Cameron <jic23@kernel.org> wrote:
> > >
> > > > On Wed, 16 Jan 2019 18:48:55 +0200
> > > > Tomer Maimon <tmaimon77@gmail.com> wrote:
> > > >
> > > > > Add Nuvoton NPCM BMC Analog-to-Digital Converter(ADC) driver.
> > > > >
> > > > > The NPCM ADC is a 10-bit converter for eight channel inputs.
> > > > >
> > > > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> > > > One trivial ordering in remove oddity that I'll just fix up.
> > > > Also, I don't particularly like printing a message on success
> > > > as it's not providing any useful info. Hmm. I don't care
> > > > strongly enough to remove it though.
> > > >
> > >
> > > The Probe log is is important for us when customers doing bring-up or
> > have
> > > some issues,
> > > we ask the logs w/o asking to do all kinds of things to see if a device
> > was
> > > probed.
> >
> > You should probably develop a proper info gathering script. Chances of
> > this
> > randomly getting 'tidied up' in future (i.e. remove) is rather high and
> > I doubt I'll remember this if you miss the patch...
> >
> > I don't care all that much though and your problem if it goes away. Kernel
> > logs shouldn't be used as ABI. Even error messages tend to change over
> > time!
> >
> > Jonathan
> >
> > >
> > >
> > > > Applied to the togreg branch of iio.git and pushed out as
> > > > testing for the autobuilders to play with it.
> > > >
> > > > Thanks,
> > > >
> > > > Jonathan
> > > >
> > > > > ---
> > > > > drivers/iio/adc/Kconfig | 10 ++
> > > > > drivers/iio/adc/Makefile | 1 +
> > > > > drivers/iio/adc/npcm_adc.c | 335
> > > > +++++++++++++++++++++++++++++++++++++++++++++
> > > > > 3 files changed, 346 insertions(+)
> > > > > create mode 100644 drivers/iio/adc/npcm_adc.c
> > > > >
> > > > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > > > > index 7a3ca4ec0cb7..2d1e70a7d5c4 100644
> > > > > --- a/drivers/iio/adc/Kconfig
> > > > > +++ b/drivers/iio/adc/Kconfig
> > > > > @@ -576,6 +576,16 @@ config NAU7802
> > > > > To compile this driver as a module, choose M here: the
> > > > > module will be called nau7802.
> > > > >
> > > > > +config NPCM_ADC
> > > > > + tristate "Nuvoton NPCM ADC driver"
> > > > > + depends on ARCH_NPCM || COMPILE_TEST
> > > > > + depends on HAS_IOMEM
> > > > > + help
> > > > > + Say yes here to build support for Nuvoton NPCM ADC.
> > > > > +
> > > > > + This driver can also be built as a module. If so, the module
> > > > > + will be called npcm_adc.
> > > > > +
> > > > > config PALMAS_GPADC
> > > > > tristate "TI Palmas General Purpose ADC"
> > > > > depends on MFD_PALMAS
> > > > > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> > > > > index 07df37f621bd..3337eb1f4c30 100644
> > > > > --- a/drivers/iio/adc/Makefile
> > > > > +++ b/drivers/iio/adc/Makefile
> > > > > @@ -55,6 +55,7 @@ obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
> > > > > obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
> > > > > obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o
> > > > > obj-$(CONFIG_NAU7802) += nau7802.o
> > > > > +obj-$(CONFIG_NPCM_ADC) += npcm_adc.o
> > > > > obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
> > > > > obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o
> > > > > obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
> > > > > diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
> > > > > new file mode 100644
> > > > > index 000000000000..1cc377cdf1f7
> > > > > --- /dev/null
> > > > > +++ b/drivers/iio/adc/npcm_adc.c
> > > > > @@ -0,0 +1,335 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > +// Copyright (c) 2019 Nuvoton Technology corporation.
> > > > > +
> > > > > +#include <linux/clk.h>
> > > > > +#include <linux/device.h>
> > > > > +#include <linux/mfd/syscon.h>
> > > > > +#include <linux/io.h>
> > > > > +#include <linux/iio/iio.h>
> > > > > +#include <linux/interrupt.h>
> > > > > +#include <linux/kernel.h>
> > > > > +#include <linux/module.h>
> > > > > +#include <linux/platform_device.h>
> > > > > +#include <linux/regmap.h>
> > > > > +#include <linux/regulator/consumer.h>
> > > > > +#include <linux/spinlock.h>
> > > > > +#include <linux/uaccess.h>
> > > > > +
> > > > > +struct npcm_adc {
> > > > > + bool int_status;
> > > > > + u32 adc_sample_hz;
> > > > > + struct device *dev;
> > > > > + void __iomem *regs;
> > > > > + struct clk *adc_clk;
> > > > > + wait_queue_head_t wq;
> > > > > + struct regulator *vref;
> > > > > + struct regmap *rst_regmap;
> > > > > +};
> > > > > +
> > > > > +/* NPCM7xx reset module */
> > > > > +#define NPCM7XX_IPSRST1_OFFSET 0x020
> > > > > +#define NPCM7XX_IPSRST1_ADC_RST BIT(27)
> > > > > +
> > > > > +/* ADC registers */
> > > > > +#define NPCM_ADCCON 0x00
> > > > > +#define NPCM_ADCDATA 0x04
> > > > > +
> > > > > +/* ADCCON Register Bits */
> > > > > +#define NPCM_ADCCON_ADC_INT_EN BIT(21)
> > > > > +#define NPCM_ADCCON_REFSEL BIT(19)
> > > > > +#define NPCM_ADCCON_ADC_INT_ST BIT(18)
> > > > > +#define NPCM_ADCCON_ADC_EN BIT(17)
> > > > > +#define NPCM_ADCCON_ADC_RST BIT(16)
> > > > > +#define NPCM_ADCCON_ADC_CONV BIT(13)
> > > > > +
> > > > > +#define NPCM_ADCCON_CH_MASK GENMASK(27, 24)
> > > > > +#define NPCM_ADCCON_CH(x) ((x) << 24)
> > > > > +#define NPCM_ADCCON_DIV_SHIFT 1
> > > > > +#define NPCM_ADCCON_DIV_MASK GENMASK(8, 1)
> > > > > +#define NPCM_ADC_DATA_MASK(x) ((x) & GENMASK(9, 0))
> > > > > +
> > > > > +#define NPCM_ADC_ENABLE (NPCM_ADCCON_ADC_EN |
> > > > NPCM_ADCCON_ADC_INT_EN)
> > > > > +
> > > > > +/* ADC General Definition */
> > > > > +#define NPCM_RESOLUTION_BITS 10
> > > > > +#define NPCM_INT_VREF_MV 2000
> > > > > +
> > > > > +#define NPCM_ADC_CHAN(ch) { \
> > > > > + .type = IIO_VOLTAGE, \
> > > > > + .indexed = 1, \
> > > > > + .channel = ch, \
> > > > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> > > > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
> > > > > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> > > > > +}
> > > > > +
> > > > > +static const struct iio_chan_spec npcm_adc_iio_channels[] = {
> > > > > + NPCM_ADC_CHAN(0),
> > > > > + NPCM_ADC_CHAN(1),
> > > > > + NPCM_ADC_CHAN(2),
> > > > > + NPCM_ADC_CHAN(3),
> > > > > + NPCM_ADC_CHAN(4),
> > > > > + NPCM_ADC_CHAN(5),
> > > > > + NPCM_ADC_CHAN(6),
> > > > > + NPCM_ADC_CHAN(7),
> > > > > +};
> > > > > +
> > > > > +static irqreturn_t npcm_adc_isr(int irq, void *data)
> > > > > +{
> > > > > + u32 regtemp;
> > > > > + struct iio_dev *indio_dev = data;
> > > > > + struct npcm_adc *info = iio_priv(indio_dev);
> > > > > +
> > > > > + regtemp = ioread32(info->regs + NPCM_ADCCON);
> > > > > + if (regtemp & NPCM_ADCCON_ADC_INT_ST) {
> > > > > + iowrite32(regtemp, info->regs + NPCM_ADCCON);
> > > > > + wake_up_interruptible(&info->wq);
> > > > > + info->int_status = true;
> > > > > + }
> > > > > +
> > > > > + return IRQ_HANDLED;
> > > > > +}
> > > > > +
> > > > > +static int npcm_adc_read(struct npcm_adc *info, int *val, u8
> > channel)
> > > > > +{
> > > > > + int ret;
> > > > > + u32 regtemp;
> > > > > +
> > > > > + /* Select ADC channel */
> > > > > + regtemp = ioread32(info->regs + NPCM_ADCCON);
> > > > > + regtemp &= ~NPCM_ADCCON_CH_MASK;
> > > > > + info->int_status = false;
> > > > > + iowrite32(regtemp | NPCM_ADCCON_CH(channel) |
> > > > > + NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
> > > > > +
> > > > > + ret = wait_event_interruptible_timeout(info->wq,
> > info->int_status,
> > > > > + msecs_to_jiffies(10));
> > > > > + if (ret == 0) {
> > > > > + regtemp = ioread32(info->regs + NPCM_ADCCON);
> > > > > + if ((regtemp & NPCM_ADCCON_ADC_CONV) &&
> > info->rst_regmap) {
> > > > > + /* if conversion failed - reset ADC module */
> > > > > + regmap_write(info->rst_regmap,
> > > > NPCM7XX_IPSRST1_OFFSET,
> > > > > + NPCM7XX_IPSRST1_ADC_RST);
> > > > > + msleep(100);
> > > > > + regmap_write(info->rst_regmap,
> > > > NPCM7XX_IPSRST1_OFFSET,
> > > > > + 0x0);
> > > > > + msleep(100);
> > > > > +
> > > > > + /* Enable ADC and start conversion module */
> > > > > + iowrite32(NPCM_ADC_ENABLE |
> > NPCM_ADCCON_ADC_CONV,
> > > > > + info->regs + NPCM_ADCCON);
> > > > > + dev_err(info->dev, "RESET ADC Complete\n");
> > > > > + }
> > > > > + return -ETIMEDOUT;
> > > > > + }
> > > > > + if (ret < 0)
> > > > > + return ret;
> > > > > +
> > > > > + *val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +static int npcm_adc_read_raw(struct iio_dev *indio_dev,
> > > > > + struct iio_chan_spec const *chan, int
> > *val,
> > > > > + int *val2, long mask)
> > > > > +{
> > > > > + int ret;
> > > > > + int vref_uv;
> > > > > + struct npcm_adc *info = iio_priv(indio_dev);
> > > > > +
> > > > > + switch (mask) {
> > > > > + case IIO_CHAN_INFO_RAW:
> > > > > + mutex_lock(&indio_dev->mlock);
> > > > > + ret = npcm_adc_read(info, val, chan->channel);
> > > > > + mutex_unlock(&indio_dev->mlock);
> > > > > + if (ret) {
> > > > > + dev_err(info->dev, "NPCM ADC read failed\n");
> > > > > + return ret;
> > > > > + }
> > > > > + return IIO_VAL_INT;
> > > > > + case IIO_CHAN_INFO_SCALE:
> > > > > + if (info->vref) {
> > > > > + vref_uv = regulator_get_voltage(info->vref);
> > > > > + *val = vref_uv / 1000;
> > > > > + } else {
> > > > > + *val = NPCM_INT_VREF_MV;
> > > > > + }
> > > > > + *val2 = NPCM_RESOLUTION_BITS;
> > > > > + return IIO_VAL_FRACTIONAL_LOG2;
> > > > > + case IIO_CHAN_INFO_SAMP_FREQ:
> > > > > + *val = info->adc_sample_hz;
> > > > > + return IIO_VAL_INT;
> > > > > + default:
> > > > > + return -EINVAL;
> > > > > + }
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +static const struct iio_info npcm_adc_iio_info = {
> > > > > + .read_raw = &npcm_adc_read_raw,
> > > > > +};
> > > > > +
> > > > > +static const struct of_device_id npcm_adc_match[] = {
> > > > > + { .compatible = "nuvoton,npcm750-adc", },
> > > > > + { /* sentinel */ }
> > > > > +};
> > > > > +MODULE_DEVICE_TABLE(of, npcm_adc_match);
> > > > > +
> > > > > +static int npcm_adc_probe(struct platform_device *pdev)
> > > > > +{
> > > > > + int ret;
> > > > > + int irq;
> > > > > + u32 div;
> > > > > + u32 reg_con;
> > > > > + struct resource *res;
> > > > > + struct npcm_adc *info;
> > > > > + struct iio_dev *indio_dev;
> > > > > + struct device *dev = &pdev->dev;
> > > > > + struct device_node *np = pdev->dev.of_node;
> > > > > +
> > > > > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> > > > > + if (!indio_dev)
> > > > > + return -ENOMEM;
> > > > > + info = iio_priv(indio_dev);
> > > > > +
> > > > > + info->dev = &pdev->dev;
> > > > > +
> > > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > > > + info->regs = devm_ioremap_resource(&pdev->dev, res);
> > > > > + if (IS_ERR(info->regs))
> > > > > + return PTR_ERR(info->regs);
> > > > > +
> > > > > + info->adc_clk = devm_clk_get(&pdev->dev, NULL);
> > > > > + if (IS_ERR(info->adc_clk)) {
> > > > > + dev_warn(&pdev->dev, "ADC clock failed: can't read
> > clk\n");
> > > > > + return PTR_ERR(info->adc_clk);
> > > > > + }
> > > > > +
> > > > > + /* calculate ADC clock sample rate */
> > > > > + reg_con = ioread32(info->regs + NPCM_ADCCON);
> > > > > + div = reg_con & NPCM_ADCCON_DIV_MASK;
> > > > > + div = div >> NPCM_ADCCON_DIV_SHIFT;
> > > > > + info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1)
> > *
> > > > 2);
> > > > > +
> > > > > + if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
> > > > > + info->rst_regmap = syscon_regmap_lookup_by_compatible
> > > > > + ("nuvoton,npcm750-rst");
> > > > > + if (IS_ERR(info->rst_regmap)) {
> > > > > + dev_err(&pdev->dev, "Failed to find
> > > > nuvoton,npcm750-rst\n");
> > > > > + ret = PTR_ERR(info->rst_regmap);
> > > > > + goto err_disable_clk;
> > > > > + }
> > > > > + }
> > > > > +
> > > > > + irq = platform_get_irq(pdev, 0);
> > > > > + if (irq <= 0) {
> > > > > + dev_err(dev, "failed getting interrupt resource\n");
> > > > > + ret = -EINVAL;
> > > > > + goto err_disable_clk;
> > > > > + }
> > > > > +
> > > > > + ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
> > > > > + "NPCM_ADC", indio_dev);
> > > > > + if (ret < 0) {
> > > > > + dev_err(dev, "failed requesting interrupt\n");
> > > > > + goto err_disable_clk;
> > > > > + }
> > > > > +
> > > > > + reg_con = ioread32(info->regs + NPCM_ADCCON);
> > > > > + info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
> > > > > + if (!IS_ERR(info->vref)) {
> > > > > + ret = regulator_enable(info->vref);
> > > > > + if (ret) {
> > > > > + dev_err(&pdev->dev, "Can't enable ADC
> > reference
> > > > voltage\n");
> > > > > + goto err_disable_clk;
> > > > > + }
> > > > > +
> > > > > + iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
> > > > > + info->regs + NPCM_ADCCON);
> > > > > + } else {
> > > > > + /*
> > > > > + * Any error which is not ENODEV indicates the
> > regulator
> > > > > + * has been specified and so is a failure case.
> > > > > + */
> > > > > + if (PTR_ERR(info->vref) != -ENODEV) {
> > > > > + ret = PTR_ERR(info->vref);
> > > > > + goto err_disable_clk;
> > > > > + }
> > > > > +
> > > > > + /* Use internal reference */
> > > > > + iowrite32(reg_con | NPCM_ADCCON_REFSEL,
> > > > > + info->regs + NPCM_ADCCON);
> > > > > + }
> > > > > +
> > > > > + init_waitqueue_head(&info->wq);
> > > > > +
> > > > > + reg_con = ioread32(info->regs + NPCM_ADCCON);
> > > > > + reg_con |= NPCM_ADC_ENABLE;
> > > > > +
> > > > > + /* Enable the ADC Module */
> > > > > + iowrite32(reg_con, info->regs + NPCM_ADCCON);
> > > > > +
> > > > > + /* Start ADC conversion */
> > > > > + iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs +
> > > > NPCM_ADCCON);
> > > > > +
> > > > > + platform_set_drvdata(pdev, indio_dev);
> > > > > + indio_dev->name = dev_name(&pdev->dev);
> > > > > + indio_dev->dev.parent = &pdev->dev;
> > > > > + indio_dev->info = &npcm_adc_iio_info;
> > > > > + indio_dev->modes = INDIO_DIRECT_MODE;
> > > > > + indio_dev->channels = npcm_adc_iio_channels;
> > > > > + indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels);
> > > > > +
> > > > > + ret = iio_device_register(indio_dev);
> > > > > + if (ret) {
> > > > > + dev_err(&pdev->dev, "Couldn't register the device.\n");
> > > > > + goto err_iio_register;
> > > > > + }
> > > > > +
> > > > > + pr_info("NPCM ADC driver probed\n");
> > > > Hmm. Not sure this tells us anything useful. If we have succeeding
> > > > in probing there are lots of ways to find out that are better than
> > > > filling up the kernel log.
> > > >
> > > > > +
> > > > > + return 0;
> > > > > +
> > > > > +err_iio_register:
> > > > > + iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs +
> > NPCM_ADCCON);
> > > > > + if (!IS_ERR(info->vref))
> > > > > + regulator_disable(info->vref);
> > > > > +err_disable_clk:
> > > > > + clk_disable_unprepare(info->adc_clk);
> > > > > +
> > > > > + return ret;
> > > > > +}
> > > > > +
> > > > > +static int npcm_adc_remove(struct platform_device *pdev)
> > > > > +{
> > > > > + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> > > > > + struct npcm_adc *info = iio_priv(indio_dev);
> > > > > + u32 regtemp;
> > > > > +
> > > > > + regtemp = ioread32(info->regs + NPCM_ADCCON);
> > > >
> > > > The ordering is a bit odd here. I would have done the unregister
> > > > first then read the value. Doesn't have any real effect other than
> > making
> > > > reviewers wonder if there is something interesting going on!
> > > >
> > > > > +
> > > > > + iio_device_unregister(indio_dev);
> > > > > + iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs +
> > NPCM_ADCCON);
> > > > > + if (!IS_ERR(info->vref))
> > > > > + regulator_disable(info->vref);
> > > > > + clk_disable_unprepare(info->adc_clk);
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +static struct platform_driver npcm_adc_driver = {
> > > > > + .probe = npcm_adc_probe,
> > > > > + .remove = npcm_adc_remove,
> > > > > + .driver = {
> > > > > + .name = "npcm_adc",
> > > > > + .of_match_table = npcm_adc_match,
> > > > > + },
> > > > > +};
> > > > > +
> > > > > +module_platform_driver(npcm_adc_driver);
> > > > > +
> > > > > +MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver");
> > > > > +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
> > > > > +MODULE_LICENSE("GPL v2");
> > > >
> > > >
> > > Thanks,
> > >
> > > Tomer
> >
> >

\
 
 \ /
  Last update: 2019-02-02 10:48    [W:0.064 / U:45.512 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site