lkml.org 
[lkml]   [2019]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 08/13] spi: atmel-quadspi: drop unused and NOP transfer macros
On Sat, 2 Feb 2019 04:07:33 +0000
<Tudor.Ambarus@microchip.com> wrote:

> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> Remove NOP when setting read transfer type. Remove useless
> setting of write transfer type when
> op->data.dir == SPI_MEM_DATA_IN && !op->data.nbytes.
>
> QSPI_IFR_TFRTYP_TRSFR_WRITE is specific just to sama5d2 qspi,
> rename it to QSPI_IFR_SAMA5D2_WRITE_TRSFR.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> v3: new patch
>
> drivers/spi/atmel-quadspi.c | 12 +++---------
> 1 file changed, 3 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> index d26d4cd0e36b..bfa5f5e92d96 100644
> --- a/drivers/spi/atmel-quadspi.c
> +++ b/drivers/spi/atmel-quadspi.c
> @@ -113,11 +113,7 @@
> #define QSPI_IFR_OPTL_4BIT (2 << 8)
> #define QSPI_IFR_OPTL_8BIT (3 << 8)
> #define QSPI_IFR_ADDRL BIT(10)
> -#define QSPI_IFR_TFRTYP_MASK GENMASK(13, 12)
> -#define QSPI_IFR_TFRTYP_TRSFR_READ (0 << 12)
> -#define QSPI_IFR_TFRTYP_TRSFR_READ_MEM (1 << 12)
> -#define QSPI_IFR_TFRTYP_TRSFR_WRITE (2 << 12)
> -#define QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM (3 << 13)
> +#define QSPI_IFR_SAMA5D2_WRITE_TRSFR BIT(13)

Can you define QSPI_IFR_TFRTYP_MEM (bit 12) even if it's not used yet?

> #define QSPI_IFR_CRM BIT(14)
> #define QSPI_IFR_NBDUM_MASK GENMASK(20, 16)
> #define QSPI_IFR_NBDUM(n) (((n) << 16) & QSPI_IFR_NBDUM_MASK)
> @@ -273,10 +269,8 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
> if (op->data.nbytes)
> ifr |= QSPI_IFR_DATAEN;
>
> - if (op->data.dir == SPI_MEM_DATA_IN && op->data.nbytes)
> - ifr |= QSPI_IFR_TFRTYP_TRSFR_READ;
> - else
> - ifr |= QSPI_IFR_TFRTYP_TRSFR_WRITE;
> + if (op->data.dir == SPI_MEM_DATA_OUT)
> + ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
>
> /* Clear pending interrupts */
> (void)readl_relaxed(base + QSPI_SR);

\
 
 \ /
  Last update: 2019-02-02 08:14    [W:0.127 / U:40.348 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site