lkml.org 
[lkml]   [2019]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/9] mtd: rawnand: jz4780: Add ooblayout for the JZ4725B
Date
The boot ROM of the JZ4725B SoC expects a specific OOB layout on the
NAND.

Add an optional "ingenic,oob-layout" device property. When set to
"ingenic,jz4725b", this specific OOB layout is used.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---

Changes:

v2: Instead of forcing the OOB layout, leave it to the board code or
devicetree to decide if the jz4725b-specific layout should be used
or not.

drivers/mtd/nand/raw/ingenic/jz4780_nand.c | 51 +++++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_nand.c b/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
index c0855fef7735..baebb9a5c7c8 100644
--- a/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
+++ b/drivers/mtd/nand/raw/ingenic/jz4780_nand.c
@@ -44,6 +44,7 @@ struct jz4780_nand_cs {
struct jz4780_nand_controller {
struct device *dev;
const struct jz_soc_info *soc_info;
+ const struct mtd_ooblayout_ops *oob_layout;
struct jz4780_bch *bch;
struct nand_controller controller;
unsigned int num_banks;
@@ -213,7 +214,7 @@ static int jz4780_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
}

- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nfc->oob_layout);

return 0;
}
@@ -345,11 +346,47 @@ static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
return 0;
}

+static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section || !ecc->total)
+ return -ERANGE;
+
+ oobregion->length = ecc->total;
+ oobregion->offset = 3;
+
+ return 0;
+}
+
+static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - ecc->total - 3;
+ oobregion->offset = 3 + ecc->total;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
+ .ecc = jz4725b_ooblayout_ecc,
+ .free = jz4725b_ooblayout_free,
+};
+
static int jz4780_nand_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned int num_banks;
struct jz4780_nand_controller *nfc;
+ const char *layout;
int ret;

num_banks = jz4780_nemc_num_banks(dev);
@@ -366,6 +403,18 @@ static int jz4780_nand_probe(struct platform_device *pdev)
if (!nfc->soc_info)
return -EINVAL;

+ nfc->oob_layout = &nand_ooblayout_lp_ops;
+
+ ret = device_property_read_string(dev, "ingenic,oob-layout", &layout);
+ if (!ret) {
+ if (!strcmp(layout, "ingenic,jz4725b")) {
+ nfc->oob_layout = &jz4725b_ooblayout_ops;
+ } else {
+ dev_err(dev, "Unrecognized OOB layout %s\n", layout);
+ return -EINVAL;
+ }
+ }
+
/*
* Check for BCH HW before we call nand_scan_ident, to prevent us from
* having to call it again if the BCH driver returns -EPROBE_DEFER.
--
2.20.1
\
 
 \ /
  Last update: 2019-02-03 00:20    [W:0.162 / U:7.428 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site