lkml.org 
[lkml]   [2019]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] platform/x86: intel_int0002_vgpio: Implement irq_set_wake
On Sat, Feb 2, 2019 at 12:52 AM Hans de Goede <hdegoede@redhat.com> wrote:
>
> Hi,
>
> On 1/31/19 8:47 PM, Maxim Mikityanskiy wrote:
> > Hi,
> >
> > On Mon, Sep 24, 2018 at 5:37 PM Hans de Goede <hdegoede@redhat.com> wrote:
> >>
> >> We were relying on the interrupt being shared with the ACPI SCI and the
> >> ACPI core calling irq_set_wake. But that does not always happen on
> >> Bay Trail devices, so we should do it ourselves.
> >>
> >> This fixes wake from USB not working on various Bay Trail devices.
> >
> > This patch breaks suspend on ASUS E202SA (bisecting pointed me to this
> > patch, and if I revert it and build 4.20.5 without this patch,
> > everything works flawlessly).
>
> Thank you for the bug report, can you please test 4.20.5 with the attached
> patch on top? That should fix it. Once I've confirmation that this fixes
> things I will submit the patch upstream.

I've tested your patch against both 4.20.5 and 4.20.6, and it works
fine. Thank you for such a quick fix.

> Regards,
>
> Hans
>
>
> >
> > This command fails with the following message:
> >
> > # echo mem > /sys/power/state
> > Error while writing to stdout
> > write_loop: Device or resource busy
> >
> > And here is dmesg output:
> >
> > [ 224.077275] PM: suspend entry (deep)
> > [ 224.077286] PM: Syncing filesystems ... done.
> > [ 225.495014] Freezing user space processes ... (elapsed 0.003 seconds) done.
> > [ 225.498540] OOM killer disabled.
> > [ 225.498543] Freezing remaining freezable tasks ... (elapsed 0.002
> > seconds) done.
> > [ 225.500693] printk: Suspending console(s) (use no_console_suspend to debug)
> > [ 225.502793] wlp1s0: deauthenticating from 00:03:7f:12:34:56 by
> > local choice (Reason: 3=DEAUTH_LEAVING)
> > [ 225.535333] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> > [ 225.535882] sd 0:0:0:0: [sda] Stopping disk
> > [ 226.969070] ACPI: EC: interrupt blocked
> > [ 227.002156] ACPI: Preparing to enter system sleep state S3
> > [ 227.007890] ACPI: EC: event blocked
> > [ 227.007895] ACPI: EC: EC stopped
> > [ 227.007900] PM: Saving platform NVS memory
> > [ 227.008264] Disabling non-boot CPUs ...
> > [ 227.034114] smpboot: CPU 1 is now offline
> > [ 227.088320] smpboot: CPU 2 is now offline
> > [ 227.141513] smpboot: CPU 3 is now offline
> > [ 227.147086] Enabling non-boot CPUs ...
> > [ 227.147187] x86: Booting SMP configuration:
> > [ 227.147190] smpboot: Booting Node 0 Processor 1 APIC 0x2
> > [ 227.147916] cache: parent cpu1 should not be sleeping
> > [ 227.148354] CPU1 is up
> > [ 227.148424] smpboot: Booting Node 0 Processor 2 APIC 0x4
> > [ 227.149800] cache: parent cpu2 should not be sleeping
> > [ 227.151143] CPU2 is up
> > [ 227.151187] smpboot: Booting Node 0 Processor 3 APIC 0x6
> > [ 227.152399] cache: parent cpu3 should not be sleeping
> > [ 227.153883] CPU3 is up
> > [ 227.154876] ACPI: EC: EC started
> > [ 227.155282] ACPI: Waking up from system sleep state S3
> > [ 227.159874] ACPI: button: The lid device is not compliant to SW_LID.
> > [ 227.169441] ACPI: EC: interrupt unblocked
> > [ 228.236790] ACPI: EC: event unblocked
> > [ 228.241950] rtlwifi: rtlwifi: wireless switch is on
> > [ 228.251865] sd 0:0:0:0: [sda] Starting disk
> > [ 228.476637] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
> > [ 228.562879] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> > [ 228.563924] ata2: SATA link down (SStatus 4 SControl 300)
> > [ 228.564979] ata1.00: supports DRM functions and may not be fully accessible
> > [ 228.565493] ata1.00: NCQ Send/Recv Log not supported
> > [ 228.567649] ata1.00: supports DRM functions and may not be fully accessible
> > [ 228.568252] ata1.00: NCQ Send/Recv Log not supported
> > [ 228.570075] ata1.00: configured for UDMA/133
> > [ 228.580412] ahci 0000:00:13.0: port does not support device sleep
> > [ 228.639349] Bluetooth: hci0: RTL: rtl: examining hci_ver=06
> > hci_rev=0e2f lmp_ver=06 lmp_subver=a041
> >
> > [ 228.639368] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver
> > a041, hci rev 0e2f, hci ver 0006
> > [ 228.639742] acpi LNXPOWER:01: Turning OFF
> > [ 228.640033] OOM killer enabled.
> > [ 228.640040] Restarting tasks ... done.
> > [ 228.795406] PM: suspend exit
> > [ 228.800399] audit: type=1130 audit(1548962671.104:94): pid=1 uid=0
> > auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd"
> > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
> > res=success'
> > [ 229.067206] wlp1s0: authenticate with 12:34:56:78:90:12
> > [ 229.067823] wlp1s0: send auth to 12:34:56:78:90:12 (try 1/3)
> > [ 229.070955] wlp1s0: authenticated
> > [ 229.072395] wlp1s0: associate with 12:34:56:78:90:12 (try 1/3)
> > [ 229.074505] wlp1s0: RX AssocResp from 12:34:56:78:90:12 (capab=0x11
> > status=0 aid=2)
> > [ 229.074819] wlp1s0: associated
> > [ 233.809200] audit: type=1131 audit(1548962676.106:95): pid=1 uid=0
> > auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd"
> > exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
> > res=success'
> >
> > The laptop doesn't go to sleep, the screen turns off, and in a couple
> > of seconds it turns on.
> >
> > Please take a look at this regression. Feel free to ask me for any
> > additional information you need.
> >
> > Thanks,
> > Max
> >
> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> >> ---
> >> drivers/platform/x86/intel_int0002_vgpio.c | 16 ++++++++++++++++
> >> 1 file changed, 16 insertions(+)
> >>
> >> diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel_int0002_vgpio.c
> >> index 987a3b03f225..33c3489f5bc1 100644
> >> --- a/drivers/platform/x86/intel_int0002_vgpio.c
> >> +++ b/drivers/platform/x86/intel_int0002_vgpio.c
> >> @@ -106,6 +106,21 @@ static void int0002_irq_mask(struct irq_data *data)
> >> outl(gpe_en_reg, GPE0A_EN_PORT);
> >> }
> >>
> >> +static int int0002_irq_set_wake(struct irq_data *data, unsigned int on)
> >> +{
> >> + struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> >> + struct platform_device *pdev = to_platform_device(chip->parent);
> >> + int irq = platform_get_irq(pdev, 0);
> >> +
> >> + /* Propagate to parent irq */
> >> + if (on)
> >> + enable_irq_wake(irq);
> >> + else
> >> + disable_irq_wake(irq);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> static irqreturn_t int0002_irq(int irq, void *data)
> >> {
> >> struct gpio_chip *chip = data;
> >> @@ -128,6 +143,7 @@ static struct irq_chip int0002_irqchip = {
> >> .irq_ack = int0002_irq_ack,
> >> .irq_mask = int0002_irq_mask,
> >> .irq_unmask = int0002_irq_unmask,
> >> + .irq_set_wake = int0002_irq_set_wake,
> >> };
> >>
> >> static int int0002_probe(struct platform_device *pdev)

\
 
 \ /
  Last update: 2019-02-02 20:05    [W:0.064 / U:4.104 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site