[lkml]   [2019]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] PCI / ACPI: Don't clear pme_poll on device that has unreliable ACPI wake
Hi Bjorn,

> On Jan 28, 2019, at 3:51 PM, Kai Heng Feng <> wrote:

>> If I understand correctly, the bugzilla lspci
>> ( was collected
>> at point 8, and it shows PME_Status=1 when it should be 0.
>> If we write a 1 to PME_Status to clear it, and it remains set, that's
>> obviously a hardware defect, and Intel should document that in an
>> erratum, and a quirk would be the appropriate way to work around it.
>> But I doubt that's what's happening.
> I’ll ask them if they can provide an erratum.

Got confirmed with e1000e folks, I219 (the device in question) doesn’t really support runtime D3.
I also checked the behavior of the device under Windows, and it stays at D0 all the time even when it’s not in use.

So I sent a patch [1] to disable it.



 \ /
  Last update: 2019-02-02 18:48    [W:0.104 / U:3.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site