lkml.org 
[lkml]   [2019]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] Bluetooth: hci_uart: Switch pty driver to slave side in tty_set_termios()
From
Date
Hi Myungho,

> tty_set_termios() should be called with slave side of pty driver. So, If
> tty driver is pty master, it needs to be switched to ->link.
>
> Reported-by: syzbot+a950165cbb86bdd023a4@syzkaller.appspotmail.com
> Signed-off-by: Myungho Jung <mhjungk@gmail.com>
> ---
> drivers/bluetooth/hci_ldisc.c | 27 ++++++++++++++++++++++-----
> 1 file changed, 22 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
> index fbf7b4df23ab..0f6e70ea1dc3 100644
> --- a/drivers/bluetooth/hci_ldisc.c
> +++ b/drivers/bluetooth/hci_ldisc.c
> @@ -299,10 +299,21 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
> return 0;
> }
>
> +/* If pty master, return slave side */
> +static struct tty_struct *hci_uart_get_real_tty(struct tty_struct *tty)
> +{
> + if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
> + tty->driver->subtype == PTY_TYPE_MASTER)
> + tty->link;
> +
> + return tty;
> +}
> +
> /* Flow control or un-flow control the device */
> void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
> {
> struct tty_struct *tty = hu->tty;
> + struct tty_struct *real_tty;
> struct ktermios ktermios;
> int status;
> unsigned int set = 0;
> @@ -314,11 +325,14 @@ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
> return;
> }
>
> + /* termios should be set from slave side if tty driver is pty */
> + real_tty = hci_uart_get_real_tty(tty);
> +
> if (enable) {
> /* Disable hardware flow control */
> - ktermios = tty->termios;
> + ktermios = real_tty->termios;
> ktermios.c_cflag &= ~CRTSCTS;
> - status = tty_set_termios(tty, &ktermios);
> + status = tty_set_termios(real_tty, &ktermios);
> BT_DBG("Disabling hardware flow control: %s",
> status ? "failed" : "success");
>
> @@ -350,9 +364,9 @@ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
> BT_DBG("Setting RTS: %s", status ? "failed" : "success");
>
> /* Re-enable hardware flow control */
> - ktermios = tty->termios;
> + ktermios = real_tty->termios;
> ktermios.c_cflag |= CRTSCTS;
> - status = tty_set_termios(tty, &ktermios);
> + status = tty_set_termios(real_tty, &ktermios);
> BT_DBG("Enabling hardware flow control: %s",
> status ? "failed" : "success");
> }
> @@ -367,9 +381,12 @@ void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
>
> void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
> {
> - struct tty_struct *tty = hu->tty;
> + struct tty_struct *tty;
> struct ktermios ktermios;
>
> + /* termios should be set from slave side if tty driver is pty */
> + tty = hci_uart_get_real_tty(hu->tty);
> +

didn’t we conclude that allowing the HCI line discipline on a PTY master isn't worth the effort? The ptm_unix98_ops doesn’t have the .set_termios and thus, just check that ops->set_termios is present in hci_uart_tty_open and if not fail with EOPNOTSUPP like we do for missing ops->write.

Regards

Marcel

\
 
 \ /
  Last update: 2019-02-02 13:15    [W:0.029 / U:1.080 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site