lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 7/9] s390: ap: implement PAPQ AQIC interception in kernel
From
Date
On 16/02/2019 00:11, Tony Krowiak wrote:
> On 2/14/19 8:51 AM, Pierre Morel wrote:
>> We register the AP PQAP instruction hook during the open
>> of the mediated device. And unregister it on release.
>>
>> In the AP PQAP instruction hook, if we receive a demand to
>> enable IRQs,
>> - we retrieve the vfio_ap_queue based on the APQN we receive
>>    in REG1,
>> - we retrieve the page of the guest address, (NIB), from
>>    register REG2
>> - we the mediated device to use the VFIO pinning infratrsucture
>>    to pin the page of the guest address,
>> - we retrieve the pointer to KVM to register the guest ISC
>>    and retrieve the host ISC
>> - finaly we activate GISA
>>
>> If we receive a demand to disable IRQs,
>> - we deactivate GISA
>> - unregister from the GIB
>> - unping the NIB
>>
>> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
>> ---
>>   drivers/s390/crypto/ap_bus.h          |   1 +
>>   drivers/s390/crypto/vfio_ap_ops.c     | 191
>> +++++++++++++++++++++++++++++++++-
>>   drivers/s390/crypto/vfio_ap_private.h |   2 +
>>   3 files changed, 191 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
>> index bfc66e4..323f2aa 100644
>> --- a/drivers/s390/crypto/ap_bus.h
>> +++ b/drivers/s390/crypto/ap_bus.h
>> @@ -43,6 +43,7 @@ static inline int ap_test_bit(unsigned int *ptr,
>> unsigned int nr)
>>   #define AP_RESPONSE_BUSY        0x05
>>   #define AP_RESPONSE_INVALID_ADDRESS    0x06
>>   #define AP_RESPONSE_OTHERWISE_CHANGED    0x07
>> +#define AP_RESPONSE_INVALID_GISA    0x08
>>   #define AP_RESPONSE_Q_FULL        0x10
>>   #define AP_RESPONSE_NO_PENDING_REPLY    0x10
>>   #define AP_RESPONSE_INDEX_TOO_BIG    0x11
>> diff --git a/drivers/s390/crypto/vfio_ap_ops.c
>> b/drivers/s390/crypto/vfio_ap_ops.c
>> index 6eddc2c..5664cf3 100644
>> --- a/drivers/s390/crypto/vfio_ap_ops.c
>> +++ b/drivers/s390/crypto/vfio_ap_ops.c
>> @@ -77,6 +77,28 @@ static void vfio_ap_put_queue(struct vfio_ap_queue *q)
>>       q->dev = NULL;
>>   }
>> +/**
>> + * vfio_ap_free_irq:
>> + * @q: The vfio_ap_queue
>> + *
>> + * Unpin the guest NIB
>> + * Unregister the ISC from the GIB alert
>> + * Clear the vfio_ap_queue intern fields
>> + */
>> +static void vfio_ap_free_irq(struct vfio_ap_queue *q)
>> +{
>> +    unsigned long pfn = q->nib >> PAGE_SHIFT;
>> +
>> +    if (!q)
>> +        return;
>> +    if (q->nib)
>> +        vfio_unpin_pages(mdev_dev(q->matrix->mdev), &pfn, 1);
>> +    if (q->isc)
>> +        kvm_s390_gisc_unregister(q->matrix->kvm, q->isc);
>> +    q->nib = 0;
>> +    q->isc = 0;
>> +}
>> +
>>   static void vfio_ap_matrix_init(struct ap_config_info *info,
>>                   struct ap_matrix *matrix)
>>   {
>> @@ -98,6 +120,7 @@ static int vfio_ap_mdev_create(struct kobject
>> *kobj, struct mdev_device *mdev)
>>           return -ENOMEM;
>>       }
>> +    matrix_mdev->mdev = mdev;
>>       vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->matrix);
>>       mdev_set_drvdata(mdev, matrix_mdev);
>>       mutex_lock(&matrix_dev->lock);
>> @@ -781,6 +804,156 @@ static const struct attribute_group
>> *vfio_ap_mdev_attr_groups[] = {
>>   };
>>   /**
>> + * vfio_ap_clrirq: Disable Interruption for a APQN
>> + *
>> + * @dev: the device associated with the ap_queue
>> + * @q:   the vfio_ap_queue holding AQIC parameters
>> + *
>> + * Issue the host side PQAP/AQIC
>> + * On success: unpin the NIB saved in *q and unregister from GIB
>> + * interface
>> + *
>> + * Return the ap_queue_status returned by the ap_aqic()
>> + */
>> +static struct ap_queue_status vfio_ap_clrirq(struct vfio_ap_queue *q)
>> +{
>> +    struct ap_qirq_ctrl aqic_gisa = {};
>> +    struct ap_queue_status status;
>> +
>> +    status = ap_aqic(q->apqn, aqic_gisa, NULL);
>> +    if (!status.response_code)
>> +        vfio_ap_free_irq(q);
>> +
>> +    return status;
>> +}
>> +
>> +/**
>> + * vfio_ap_setirq: Enable Interruption for a APQN
>> + *
>> + * @dev: the device associated with the ap_queue
>> + * @q:   the vfio_ap_queue holding AQIC parameters
>> + *
>> + * Pin the NIB saved in *q
>> + * Register the guest ISC to GIB interface and retrieve the
>> + * host ISC to issue the host side PQAP/AQIC
>> + *
>> + * Response.status may be set to following Response Code in case of
>> error:
>> + * - AP_RESPONSE_INVALID_ADDRESS: vfio_pin_pages failed
>> + * - AP_RESPONSE_OTHERWISE_CHANGED: Hypervizor GISA internal error
>> + *
>> + * Otherwise return the ap_queue_status returned by the ap_aqic()
>> + */
>> +static struct ap_queue_status vfio_ap_setirq(struct vfio_ap_queue *q)
>> +{
>> +    struct ap_qirq_ctrl aqic_gisa = {};
>> +    struct ap_queue_status status = {};
>> +    struct kvm_s390_gisa *gisa;
>> +    struct kvm *kvm;
>> +    unsigned long g_pfn, h_nib, h_pfn;
>> +    int ret;
>> +
>> +    kvm = q->matrix->kvm;
>> +    gisa = kvm->arch.gisa_int.origin;
>> +
>> +    g_pfn = q->nib >> PAGE_SHIFT;
>> +    ret = vfio_pin_pages(mdev_dev(q->matrix->mdev), &g_pfn, 1,
>> +                 IOMMU_READ | IOMMU_WRITE, &h_pfn);
>> +    switch (ret) {
>> +    case 1:
>> +        break;
>> +    case -EINVAL:
>> +    case -E2BIG:
>> +        status.response_code = AP_RESPONSE_INVALID_ADDRESS;
>> +        /* Fallthrough */
>> +    default:
>> +        return status;
>> +    }
>> +
>> +    h_nib = (h_pfn << PAGE_SHIFT) | (q->nib & ~PAGE_MASK);
>> +    aqic_gisa.gisc = q->isc;
>> +    aqic_gisa.isc = kvm_s390_gisc_register(kvm, q->isc);
>> +    aqic_gisa.ir = 1;
>> +    aqic_gisa.gisa = gisa->next_alert >> 4;
>> +
>> +    status = ap_aqic(q->apqn, aqic_gisa, (void *)h_nib);
>> +    if (status.response_code == AP_RESPONSE_INVALID_GISA) {
>> +        status.response_code = AP_RESPONSE_OTHERWISE_CHANGED;
>> +        pr_warn("vfio_ap: apqn %02x.%04x: AP_RESPONSE_INVALID_GISA\n",
>> +            (q->apqn >> 8) & 0xff, q->apqn & 0xff);
>> +    }
>> +
>> +    if (status.response_code)
>> +        vfio_ap_free_irq(q);
>> +
>> +    return status;
>> +}
>> +
>> +/**
>> + * handle_pqap: PQAP instruction callback
>> + *
>> + * @vcpu: The vcpu on which we received the PQAP instruction
>> + *
>> + * Get the general register contents to initialize internal variables.
>> + * REG[0]: APQN
>> + * REG[1]: IR and ISC
>> + * REG[2]: NIB
>> + *
>> + * Response.status may be set to following Response Code:
>> + * - AP_RESPONSE_Q_NOT_AVAIL: if the queue is not available
>> + * - AP_RESPONSE_DECONFIGURED: if the queue is not configured
>> + * - AP_RESPONSE_NORMAL (0) : in case of successs
>> + *   Check vfio_ap_setirq() and vfio_ap_clrirq() for other possible RC.
>> + *
>> + * Return 0 if we could handle the request inside KVM.
>> + * otherwise, returns -EOPNOTSUPP to let QEMU handle the fault.
>> + */
>
> This function be nothing more than a switch statement for the
> function code sent with the PQAP instruction. Each case should
> be a call to a appropriate PQAP function handler. This will make
> it much easier to add additional handlers for the 6 other
> PQAP functions if necessary at some time down the road.

AFAIK there are only two PQAP functions we can intercept.

I will give attention to this function.
I will wait to this on the answers from KVM maintainers to know which
KVM functions I can use here.


>
>> +static int handle_pqap(struct kvm_vcpu *vcpu)
>> +{    int ret.
>     uint8_t fc;
>
>     fc = vcpu->run->s.regs.gprs[0] >> 24;
>     switch(fc) {
>     case 0x03:
>         ret = handle_pqap_aqic(vcpu);
>     default:
>         ret = -EOPNOTSUPP;
>     }
>
>     return ret;
> }
>
> static int handle_pqap_aqic(struct kvm_vcpu *vcpu) {
>> +    uint64_t status;
>> +    uint16_t apqn;
>     struct device *qdev;
>> +    struct vfio_ap_queue *q;
>> +    struct ap_queue_status qstatus = {};
>> +    struct ap_matrix_mdev *matrix_mdev;
>> +
>> +    /* If we do not use the AIV facility just go to userland */
>> +    if (!(vcpu->arch.sie_block->eca & ECA_AIV))
>> +        return -EOPNOTSUPP;
>> +
>> +    apqn = vcpu->run->s.regs.gprs[0] & 0xffff;
>> +    q = vfio_ap_get_queue(apqn);
>
> Replace with:
>     qdev = vfio_ap_get_queue_dev(apqn);

You asked to revisit the life cycle of the vfio_ap_queues in another thread.
I will do it.

Thanks
Pierre

--
Pierre Morel
Linux/KVM/QEMU in Böblingen - Germany

\
 
 \ /
  Last update: 2019-02-19 20:17    [W:0.089 / U:1.592 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site