lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v3 7/9] s390: ap: implement PAPQ AQIC interception in kernel
From
Date
On 2/14/19 8:51 AM, Pierre Morel wrote:
> We register the AP PQAP instruction hook during the open
> of the mediated device. And unregister it on release.
>
> In the AP PQAP instruction hook, if we receive a demand to
> enable IRQs,
> - we retrieve the vfio_ap_queue based on the APQN we receive
> in REG1,
> - we retrieve the page of the guest address, (NIB), from
> register REG2
> - we the mediated device to use the VFIO pinning infratrsucture
> to pin the page of the guest address,
> - we retrieve the pointer to KVM to register the guest ISC
> and retrieve the host ISC
> - finaly we activate GISA
>
> If we receive a demand to disable IRQs,
> - we deactivate GISA
> - unregister from the GIB
> - unping the NIB
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> ---
> drivers/s390/crypto/ap_bus.h | 1 +
> drivers/s390/crypto/vfio_ap_ops.c | 191 +++++++++++++++++++++++++++++++++-
> drivers/s390/crypto/vfio_ap_private.h | 2 +
> 3 files changed, 191 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
> index bfc66e4..323f2aa 100644
> --- a/drivers/s390/crypto/ap_bus.h
> +++ b/drivers/s390/crypto/ap_bus.h
> @@ -43,6 +43,7 @@ static inline int ap_test_bit(unsigned int *ptr, unsigned int nr)
> #define AP_RESPONSE_BUSY 0x05
> #define AP_RESPONSE_INVALID_ADDRESS 0x06
> #define AP_RESPONSE_OTHERWISE_CHANGED 0x07
> +#define AP_RESPONSE_INVALID_GISA 0x08
> #define AP_RESPONSE_Q_FULL 0x10
> #define AP_RESPONSE_NO_PENDING_REPLY 0x10
> #define AP_RESPONSE_INDEX_TOO_BIG 0x11
> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
> index 6eddc2c..5664cf3 100644
> --- a/drivers/s390/crypto/vfio_ap_ops.c
> +++ b/drivers/s390/crypto/vfio_ap_ops.c
> @@ -77,6 +77,28 @@ static void vfio_ap_put_queue(struct vfio_ap_queue *q)
> q->dev = NULL;
> }
>
> +/**
> + * vfio_ap_free_irq:
> + * @q: The vfio_ap_queue
> + *
> + * Unpin the guest NIB
> + * Unregister the ISC from the GIB alert
> + * Clear the vfio_ap_queue intern fields
> + */
> +static void vfio_ap_free_irq(struct vfio_ap_queue *q)
> +{
> + unsigned long pfn = q->nib >> PAGE_SHIFT;
> +
> + if (!q)
> + return;
> + if (q->nib)
> + vfio_unpin_pages(mdev_dev(q->matrix->mdev), &pfn, 1);
> + if (q->isc)
> + kvm_s390_gisc_unregister(q->matrix->kvm, q->isc);
> + q->nib = 0;
> + q->isc = 0;
> +}
> +
> static void vfio_ap_matrix_init(struct ap_config_info *info,
> struct ap_matrix *matrix)
> {
> @@ -98,6 +120,7 @@ static int vfio_ap_mdev_create(struct kobject *kobj, struct mdev_device *mdev)
> return -ENOMEM;
> }
>
> + matrix_mdev->mdev = mdev;
> vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->matrix);
> mdev_set_drvdata(mdev, matrix_mdev);
> mutex_lock(&matrix_dev->lock);
> @@ -781,6 +804,156 @@ static const struct attribute_group *vfio_ap_mdev_attr_groups[] = {
> };
>
> /**
> + * vfio_ap_clrirq: Disable Interruption for a APQN
> + *
> + * @dev: the device associated with the ap_queue
> + * @q: the vfio_ap_queue holding AQIC parameters
> + *
> + * Issue the host side PQAP/AQIC
> + * On success: unpin the NIB saved in *q and unregister from GIB
> + * interface
> + *
> + * Return the ap_queue_status returned by the ap_aqic()
> + */
> +static struct ap_queue_status vfio_ap_clrirq(struct vfio_ap_queue *q)
> +{
> + struct ap_qirq_ctrl aqic_gisa = {};
> + struct ap_queue_status status;
> +
> + status = ap_aqic(q->apqn, aqic_gisa, NULL);
> + if (!status.response_code)
> + vfio_ap_free_irq(q);
> +
> + return status;
> +}
> +
> +/**
> + * vfio_ap_setirq: Enable Interruption for a APQN
> + *
> + * @dev: the device associated with the ap_queue
> + * @q: the vfio_ap_queue holding AQIC parameters
> + *
> + * Pin the NIB saved in *q
> + * Register the guest ISC to GIB interface and retrieve the
> + * host ISC to issue the host side PQAP/AQIC
> + *
> + * Response.status may be set to following Response Code in case of error:
> + * - AP_RESPONSE_INVALID_ADDRESS: vfio_pin_pages failed
> + * - AP_RESPONSE_OTHERWISE_CHANGED: Hypervizor GISA internal error
> + *
> + * Otherwise return the ap_queue_status returned by the ap_aqic()
> + */
> +static struct ap_queue_status vfio_ap_setirq(struct vfio_ap_queue *q)
> +{
> + struct ap_qirq_ctrl aqic_gisa = {};
> + struct ap_queue_status status = {};
> + struct kvm_s390_gisa *gisa;
> + struct kvm *kvm;
> + unsigned long g_pfn, h_nib, h_pfn;
> + int ret;
> +
> + kvm = q->matrix->kvm;
> + gisa = kvm->arch.gisa_int.origin;
> +
> + g_pfn = q->nib >> PAGE_SHIFT;
> + ret = vfio_pin_pages(mdev_dev(q->matrix->mdev), &g_pfn, 1,
> + IOMMU_READ | IOMMU_WRITE, &h_pfn);
> + switch (ret) {
> + case 1:
> + break;
> + case -EINVAL:
> + case -E2BIG:
> + status.response_code = AP_RESPONSE_INVALID_ADDRESS;
> + /* Fallthrough */
> + default:
> + return status;
> + }
> +
> + h_nib = (h_pfn << PAGE_SHIFT) | (q->nib & ~PAGE_MASK);
> + aqic_gisa.gisc = q->isc;
> + aqic_gisa.isc = kvm_s390_gisc_register(kvm, q->isc);
> + aqic_gisa.ir = 1;
> + aqic_gisa.gisa = gisa->next_alert >> 4;
> +
> + status = ap_aqic(q->apqn, aqic_gisa, (void *)h_nib);
> + if (status.response_code == AP_RESPONSE_INVALID_GISA) {
> + status.response_code = AP_RESPONSE_OTHERWISE_CHANGED;
> + pr_warn("vfio_ap: apqn %02x.%04x: AP_RESPONSE_INVALID_GISA\n",
> + (q->apqn >> 8) & 0xff, q->apqn & 0xff);
> + }
> +
> + if (status.response_code)
> + vfio_ap_free_irq(q);
> +
> + return status;
> +}
> +
> +/**
> + * handle_pqap: PQAP instruction callback
> + *
> + * @vcpu: The vcpu on which we received the PQAP instruction
> + *
> + * Get the general register contents to initialize internal variables.
> + * REG[0]: APQN
> + * REG[1]: IR and ISC
> + * REG[2]: NIB
> + *
> + * Response.status may be set to following Response Code:
> + * - AP_RESPONSE_Q_NOT_AVAIL: if the queue is not available
> + * - AP_RESPONSE_DECONFIGURED: if the queue is not configured
> + * - AP_RESPONSE_NORMAL (0) : in case of successs
> + * Check vfio_ap_setirq() and vfio_ap_clrirq() for other possible RC.
> + *
> + * Return 0 if we could handle the request inside KVM.
> + * otherwise, returns -EOPNOTSUPP to let QEMU handle the fault.
> + */

This function be nothing more than a switch statement for the
function code sent with the PQAP instruction. Each case should
be a call to a appropriate PQAP function handler. This will make
it much easier to add additional handlers for the 6 other
PQAP functions if necessary at some time down the road.

> +static int handle_pqap(struct kvm_vcpu *vcpu)
> +{ int ret.
uint8_t fc;

fc = vcpu->run->s.regs.gprs[0] >> 24;
switch(fc) {
case 0x03:
ret = handle_pqap_aqic(vcpu);
default:
ret = -EOPNOTSUPP;
}

return ret;
}

static int handle_pqap_aqic(struct kvm_vcpu *vcpu) {
> + uint64_t status;
> + uint16_t apqn;
struct device *qdev;
> + struct vfio_ap_queue *q;
> + struct ap_queue_status qstatus = {};
> + struct ap_matrix_mdev *matrix_mdev;
> +
> + /* If we do not use the AIV facility just go to userland */
> + if (!(vcpu->arch.sie_block->eca & ECA_AIV))
> + return -EOPNOTSUPP;
> +
> + apqn = vcpu->run->s.regs.gprs[0] & 0xffff;
> + q = vfio_ap_get_queue(apqn);

Replace with:
qdev = vfio_ap_get_queue_dev(apqn);

> + if (!q) {

Replace with:
if (!qdev)

> + qstatus.response_code = AP_RESPONSE_Q_NOT_AVAIL;
> + goto out;
> + }
> +
> + /* Check if the queue is associated with a guest matrix */

Add this:
q = dev_get_drvdata(qdev);

> + matrix_mdev = q->matrix;
> + if (!matrix_mdev || !matrix_mdev->kvm) {
> + qstatus.response_code = AP_RESPONSE_DECONFIGURED

> + goto out;
> + }
> +
> + status = vcpu->run->s.regs.gprs[1];
> +
> + /* If IR bit(16) is set we enable the interrupt */
> + if ((status >> (63 - 16)) & 0x01) {
> + q->isc = status & 0x07;
> + q->nib = vcpu->run->s.regs.gprs[2];
> + qstatus = vfio_ap_setirq(q);
> + if (qstatus.response_code) {
> + q->nib = 0;
> + q->isc = 0;
> + }
> + } else
> + qstatus = vfio_ap_clrirq(q);
> +
> +out:
> + memcpy(&vcpu->run->s.regs.gprs[1], &qstatus, sizeof(qstatus));
> + vfio_ap_put_queue(q);

Replace with:
put_device(qdev);

Can we just do a put_device(qdev) right after we get it since we only
need it to get the drvdata, or do we need to wait until the other work
is done?

> + return 0;
> +}
> +
> + /*
> * vfio_ap_mdev_iommu_notifier: IOMMU notifier callback
> *
> * @nb: The notifier block
> @@ -802,7 +975,9 @@ static int vfio_ap_mdev_iommu_notifier(struct notifier_block *nb,
> struct vfio_iommu_type1_dma_unmap *unmap = data;
> unsigned long g_pfn = unmap->iova >> PAGE_SHIFT;
>
> - vfio_unpin_pages(mdev_dev(matrix_mdev->mdev), &g_pfn, 1);
> + if (matrix_mdev->mdev)
> + vfio_unpin_pages(mdev_dev(matrix_mdev->mdev),
> + &g_pfn, 1);
> return NOTIFY_OK;
> }
>
> @@ -877,11 +1052,15 @@ static int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi,
> unsigned int retry)
> {
> struct ap_queue_status status;
> + struct vfio_ap_queue *q;
> +
> + q = vfio_ap_get_queue(AP_MKQID(apid, apqi));
>
> do {
> status = ap_zapq(AP_MKQID(apid, apqi));
> switch (status.response_code) {
> case AP_RESPONSE_NORMAL:
> + vfio_ap_free_irq(q);
> return 0;
> case AP_RESPONSE_RESET_IN_PROGRESS:
> case AP_RESPONSE_BUSY:
> @@ -999,6 +1178,11 @@ static int vfio_ap_mdev_open(struct mdev_device *mdev)
> if (ret)
> goto err_group;
>
> + if (!matrix_mdev->kvm) {
> + ret = -ENODEV;
> + goto err_iommu;
> + }
> +
> matrix_mdev->iommu_notifier.notifier_call = vfio_ap_mdev_iommu_notifier;
> events = VFIO_IOMMU_NOTIFY_DMA_UNMAP;
>
> @@ -1011,6 +1195,7 @@ static int vfio_ap_mdev_open(struct mdev_device *mdev)
> if (ret)
> goto err_associate;
>
> + matrix_mdev->kvm->arch.crypto.pqap_hook = handle_pqap;
> return 0;
>
> err_associate:
> @@ -1031,12 +1216,12 @@ static void vfio_ap_mdev_release(struct mdev_device *mdev)
> if (matrix_mdev->kvm)
> kvm_arch_crypto_clear_masks(matrix_mdev->kvm);
>
> - vfio_ap_mdev_reset_queues(mdev);
> + matrix_mdev->kvm->arch.crypto.pqap_hook = NULL;
> + vfio_ap_dissociate_queues(matrix_mdev);
> vfio_unregister_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
> &matrix_mdev->group_notifier);
> vfio_unregister_notifier(mdev_dev(mdev), VFIO_IOMMU_NOTIFY,
> &matrix_mdev->iommu_notifier);
> - vfio_ap_dissociate_queues(matrix_mdev);
> matrix_mdev->kvm = NULL;
> module_put(THIS_MODULE);
> }
> diff --git a/drivers/s390/crypto/vfio_ap_private.h b/drivers/s390/crypto/vfio_ap_private.h
> index 2781720..16c99e9 100644
> --- a/drivers/s390/crypto/vfio_ap_private.h
> +++ b/drivers/s390/crypto/vfio_ap_private.h
> @@ -92,5 +92,7 @@ struct vfio_ap_queue {
> struct device *dev;
> int apqn;
> struct ap_matrix_mdev *matrix;
> + unsigned long nib;
> + unsigned char isc;

> };
> #endif /* _VFIO_AP_PRIVATE_H_ */
>

\
 
 \ /
  Last update: 2019-02-16 00:12    [W:0.265 / U:30.164 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site