lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [Intel-wired-lan] [PATCH] e1000e: Disable runtime PM on CNP+
Date
> From: Intel-wired-lan [mailto:intel-wired-lan-bounces@osuosl.org] On
> Behalf Of Kai-Heng Feng
> Sent: Saturday, February 2, 2019 9:40 AM
> To: Kirsher, Jeffrey T <jeffrey.t.kirsher@intel.com>
> Cc: netdev@vger.kernel.org; Kai-Heng Feng
> <kai.heng.feng@canonical.com>; intel-wired-lan@lists.osuosl.org; linux-
> kernel@vger.kernel.org
> Subject: [Intel-wired-lan] [PATCH] e1000e: Disable runtime PM on CNP+
>
> There are some new e1000e devices can only be woken up from D3 one
> time,
> by plugging ethernet cable. Subsequent cable plugging does set PME bit
> correctly, but it still doesn't get woken up.
>
> Since e1000e connects to the root complex directly, we rely on ACPI to
> wake it up. In this case, the GPE from _PRW only works once and stops
> working after that. Though it appears to be a platform bug, e1000e
> maintainers confirmed that I219 does not support D3.
>
> So disable runtime PM on CNP+ chips. We may need to disable earlier
> generations if this bug also hit older platforms.
>
> Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=280819
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>

Tested-by: Aaron Brown <aaron.f.brown@intel.com>

\
 
 \ /
  Last update: 2019-02-15 21:38    [W:0.029 / U:23.196 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site