[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap
The following add driver patches for porting TI's am335x and am437x
devices to the sdhci-omap driver.

This involves adding external DMA support to sdhci (first 3 patches from
Chunyan) plus some miscellaneous patches to take care of deviations of
the controllers from the sdhci model.

DT changes will be posted in a separate series.

Untested versions of Chunyan's patches were posted before[1].

Tested on: am335x-evm, am335x-boneblack, am335x-sk, am437x-gpevm,
am43xx-gpevm, am437x-idk, dra7xx-evm, dra72x-evm

1. sdhci is using two bottom halves. One threaded_rq for card detect and a
tasklet for finishing mmc requests. Patch 1 removes the tasklet and
moves its function to the threaded_irq. This enables me to
terminate_sync() in sdhci_request_done()

2. Factored out common code for between the normal adn external dma case

3. Using existing API sdhci_data_timeout_irq for disabling DTO during
erase commands.

4. Fixed subject line for dt-bindings patch.


Chunyan Zhang (3):
mmc: sdhci: add support for using external DMA devices
dt-bindings: sdhci-omap: Add properties for using external dma
mmc: sdhci-omap: Add using external dma

Faiz Abbas (5):
mmc: sdhci: Get rid of finish_tasklet
mmc: sdhci: Add quirk for disabling DTO during erase command
mmc: sdhci-omap: Add DISABLE_DTO_FOR_ERASE Quirk
dt-bindings: sdhci-omap: Add am335x and am437x specific bindings
mmc: sdhci-omap: Add am335x and am437x specific compatibles

.../devicetree/bindings/mmc/sdhci-omap.txt | 9 +
drivers/mmc/host/Kconfig | 4 +
drivers/mmc/host/sdhci-omap.c | 27 +-
drivers/mmc/host/sdhci.c | 333 +++++++++++++++---
drivers/mmc/host/sdhci.h | 12 +-
5 files changed, 328 insertions(+), 57 deletions(-)


 \ /
  Last update: 2019-02-15 20:19    [W:0.142 / U:7.140 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site