lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] drm/panel: Add OSD101T2587-53TS driver
Hi Peter.

Good with more panel drivers.
Some comments in the following, please do not blindly follow them but
check that this is OK.

Sam

On Fri, Feb 15, 2019 at 04:03:15PM +0200, Peter Ujfalusi via dri-devel wrote:
> The panel is similar to OSD101T2045-53TS (which is handled by panel-simple)
> with one big difference: osd101t2587-53ts needs MIPI_DSI_TURN_ON_PERIPHERAL
> message to be sent from the host to be operational and thus can not be
> handled by panel-simple.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> +++ b/drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.c
> @@ -0,0 +1,284 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
> + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drmP.h>
Please do not use drmP.h in new drivers - we try to get rid of this file.

> +#include <drm/drm_crtc.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +
> +#include <video/mipi_display.h>
> +
> +struct osd101t2587_panel {
> + struct drm_panel base;
> + struct mipi_dsi_device *dsi;
> +
> + struct backlight_device *backlight;
> + struct regulator *supply;
> +
> + bool prepared;
> + bool enabled;
> +
> + ktime_t earliest_wake;
earliest_wake is not used, and can be deleted.

> +
> + const struct drm_display_mode *default_mode;
> + const struct drm_display_mode *mode;
Assigned but never used. Drop the assignment and the variable?

> +};
> +
> +static inline struct osd101t2587_panel *to_osd101t2587_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct osd101t2587_panel, base);
> +}
> +
> +static int osd101t2587_panel_disable(struct drm_panel *panel)
> +{
> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
> + int ret;
> +
> + if (!osd101t2587->enabled)
> + return 0;
> +
> + if (osd101t2587->backlight) {
> + osd101t2587->backlight->props.power = FB_BLANK_POWERDOWN;
> + osd101t2587->backlight->props.state |= BL_CORE_FBBLANK;
> + backlight_update_status(osd101t2587->backlight);
> + }
backlight_disable(osd101t2587->backlight);


> +
> + ret = mipi_dsi_shutdown_peripheral(osd101t2587->dsi);
> +
> + osd101t2587->enabled = false;
> +
> + return ret;
> +}
> +
> +static int osd101t2587_panel_unprepare(struct drm_panel *panel)
> +{
> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
> +
> + if (!osd101t2587->prepared)
> + return 0;
> +
> + regulator_disable(osd101t2587->supply);
> + osd101t2587->prepared = false;
> +
> + return 0;
> +}
> +
> +static int osd101t2587_panel_prepare(struct drm_panel *panel)
> +{
> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
> + int ret;
> +
> + if (osd101t2587->prepared)
> + return 0;
> +
> + ret = regulator_enable(osd101t2587->supply);
> + if (!ret)
> + osd101t2587->prepared = true;
> +
> + return ret;
> +}
> +
> +static int osd101t2587_panel_enable(struct drm_panel *panel)
> +{
> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
> + int ret;
> +
> + if (osd101t2587->enabled)
> + return 0;
> +
> + ret = mipi_dsi_turn_on_peripheral(osd101t2587->dsi);
> + if (ret)
> + return ret;
> +
> + if (osd101t2587->backlight) {
> + osd101t2587->backlight->props.power = FB_BLANK_UNBLANK;
> + osd101t2587->backlight->props.state &= ~BL_CORE_FBBLANK;
> + backlight_update_status(osd101t2587->backlight);
> + }
backlight_enable(osd101t2587->backlight);
can be used here.

> +
> + osd101t2587->enabled = true;
> +
> + return ret;
> +}
> +
> +static const struct drm_display_mode default_mode_osd101t2587 = {
> + .clock = 164400,
> + .hdisplay = 1920,
> + .hsync_start = 1920 + 152,
> + .hsync_end = 1920 + 152 + 52,
> + .htotal = 1920 + 152 + 52 + 20,
> + .vdisplay = 1200,
> + .vsync_start = 1200 + 24,
> + .vsync_end = 1200 + 24 + 6,
> + .vtotal = 1200 + 24 + 6 + 48,
> + .vrefresh = 60,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +};
> +
> +static int osd101t2587_panel_get_modes(struct drm_panel *panel)
> +{
> + struct osd101t2587_panel *osd101t2587 = to_osd101t2587_panel(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, osd101t2587->default_mode);
> + if (!mode) {
> + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
> + osd101t2587->default_mode->hdisplay,
> + osd101t2587->default_mode->vdisplay,
> + osd101t2587->default_mode->vrefresh);
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + drm_mode_probed_add(panel->connector, mode);
> +
> + panel->connector->display_info.width_mm = 217;
> + panel->connector->display_info.height_mm = 136;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs osd101t2587_panel_funcs = {
> + .disable = osd101t2587_panel_disable,
> + .unprepare = osd101t2587_panel_unprepare,
> + .prepare = osd101t2587_panel_prepare,
> + .enable = osd101t2587_panel_enable,
> + .get_modes = osd101t2587_panel_get_modes,
> +};
> +
> +static const struct of_device_id osd101t2587_of_match[] = {
> + {
> + .compatible = "osd,osd101t2587-53ts",
> + .data = &default_mode_osd101t2587,
> + }, { }
Move { } to a separate line and use { /* sentinel */ } to make it look like other drivers.


> +};
> +MODULE_DEVICE_TABLE(of, osd101t2587_of_match);
> +
> +static int osd101t2587_panel_add(struct osd101t2587_panel *osd101t2587)
> +{
> + struct device *dev = &osd101t2587->dsi->dev;
> + struct device_node *np;
> + int ret;
> +
> + osd101t2587->mode = osd101t2587->default_mode;
> +
> + osd101t2587->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(osd101t2587->supply))
> + return PTR_ERR(osd101t2587->supply);
> +
> + np = of_parse_phandle(dev->of_node, "backlight", 0);
> + if (np) {
> + osd101t2587->backlight = of_find_backlight_by_node(np);
> + of_node_put(np);
> +
> + if (!osd101t2587->backlight)
> + return -EPROBE_DEFER;
> + }
Use devm_of_find_backlight() - this results in simpler code.

> +
> + drm_panel_init(&osd101t2587->base);
> + osd101t2587->base.funcs = &osd101t2587_panel_funcs;
> + osd101t2587->base.dev = &osd101t2587->dsi->dev;
> +
> + ret = drm_panel_add(&osd101t2587->base);
> + if (ret < 0)
> + goto put_backlight;
> +
> + return 0;
> +
> +put_backlight:
> + if (osd101t2587->backlight)
> + put_device(&osd101t2587->backlight->dev);
When using devm_of_find_backlight() this is not needed.

> +
> + return ret;
> +}
> +
> +static void osd101t2587_panel_del(struct osd101t2587_panel *osd101t2587)
> +{
> + if (osd101t2587->base.dev)
> + drm_panel_remove(&osd101t2587->base);
> +
> + if (osd101t2587->backlight)
> + put_device(&osd101t2587->backlight->dev);
When you use devm_of_find_backlight() then this is done for you, so the above can be deleted.

> +}
> +
> +static int osd101t2587_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct osd101t2587_panel *osd101t2587;
> + const struct of_device_id *id;
> + int ret;
> +
> + id = of_match_node(osd101t2587_of_match, dsi->dev.of_node);
> + if (!id)
> + return -ENODEV;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> + MIPI_DSI_MODE_EOT_PACKET;
> +
> + osd101t2587 = devm_kzalloc(&dsi->dev, sizeof(*osd101t2587), GFP_KERNEL);
> + if (!osd101t2587)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, osd101t2587);
> +
> + osd101t2587->dsi = dsi;
> + osd101t2587->default_mode = id->data;
> +
> + ret = osd101t2587_panel_add(osd101t2587);
> + if (ret < 0)
> + return ret;
> +
> + return mipi_dsi_attach(dsi);
> +}
> +
> +static int osd101t2587_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct osd101t2587_panel *osd101t2587 = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = osd101t2587_panel_disable(&osd101t2587->base);
> + if (ret < 0)
> + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
> +
To trun off power supply call osd101t2587_panel_unprepare() here?

> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
> +
> + osd101t2587_panel_del(osd101t2587);
Replace this with
drm_panel_remove(osd101t2587->base);
This should be fine and no need to disable backlight, this is done in osd101t2587_panel_disable()

> +
> + return 0;
> +}
> +
> +static void osd101t2587_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct osd101t2587_panel *osd101t2587 = mipi_dsi_get_drvdata(dsi);
> +
Maybe call osd101t2587_panel_unprepare() here to turn off power supply?

> + osd101t2587_panel_disable(&osd101t2587->base);
> +}
> +
> +static struct mipi_dsi_driver osd101t2587_panel_driver = {
> + .driver = {
> + .name = "panel-osd-osd101t2587-53ts",
> + .of_match_table = osd101t2587_of_match,
> + },
> + .probe = osd101t2587_panel_probe,
> + .remove = osd101t2587_panel_remove,
> + .shutdown = osd101t2587_panel_shutdown,
> +};
> +module_mipi_dsi_driver(osd101t2587_panel_driver);
> +
> +MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
> +MODULE_DESCRIPTION("OSD101T2587-53TS DSI panel");
> +MODULE_LICENSE("GPL v2");
> --
> Peter
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

\
 
 \ /
  Last update: 2019-02-15 19:08    [W:0.099 / U:17.968 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site