lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/4] arm64: dts: allwinner: h6: orangepi: Add CPU supply regulator
Date
The original orangepi use the dcdca to supply the CPU cores. According
to the axp805 spec, the range of dcdca is 0.6 to 1.1v, 1.12 to 1.52v.
In order to support more CPU frequency, slightly increase the voltage
maximum and minimum.

In fact, in sunxi's sdk, the actual minimum and maximum voltage of the
cpu is smaller or larger than the datasheet.

For some better quality ic, the minimum voltage can be smaller.
For some poor quality ic, the maximum voltage needs to be increased a
little.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index b2526dac2fcf..e7aebaf91ede 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -159,8 +159,8 @@

reg_dcdca: dcdca {
regulator-always-on;
- regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1160000>;
regulator-name = "vdd-cpu";
};

@@ -191,6 +191,10 @@
};
};

+&cpu0 {
+ cpu-supply = <&reg_dcdca>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
--
2.17.0
\
 
 \ /
  Last update: 2019-02-15 16:55    [W:0.027 / U:3.900 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site