lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V6 2/7] clocksource: tegra: add Tegra210 timer support
From
Date
On 01/02/2019 17:16, Joseph Lo wrote:
> Add support for the Tegra210 timer that runs at oscillator clock
> (TMR10-TMR13). We need these timers to work as clock event device and to
> replace the ARMv8 architected timer due to it can't survive across the
> power cycle of the CPU core or CPUPORESET signal. So it can't be a wake-up
> source when CPU suspends in power down state.
>
> Also convert the original driver to use timer-of API.
>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Joseph Lo <josephl@nvidia.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
> Acked-by: Jon Hunter <jonathanh@nvidia.com>
> ---
> v6:
> * refine the timer defines
> * add ack tag from Jon.
> v5:
> * add ack tag from Thierry
> v4:
> * merge timer-tegra210.c in previous version into timer-tegra20.c
> v3:
> * use timer-of API
> v2:
> * add error clean-up code
> ---
> drivers/clocksource/Kconfig | 2 +-
> drivers/clocksource/timer-tegra20.c | 371 ++++++++++++++++++++--------
> include/linux/cpuhotplug.h | 1 +
> 3 files changed, 270 insertions(+), 104 deletions(-)
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index a9e26f6a81a1..6af78534a285 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -131,7 +131,7 @@ config SUN5I_HSTIMER
> config TEGRA_TIMER
> bool "Tegra timer driver" if COMPILE_TEST
> select CLKSRC_MMIO
> - depends on ARM

This will break because the delay functions are defined in
arch/arm/include/asm/delay.h and the 01.org will try to compile the
driver on x86.

You may want to add 'depends on ARM && ARM64'

> + select TIMER_OF
> help
> Enables support for the Tegra driver.
>
> diff --git a/drivers/clocksource/timer-tegra20.c b/drivers/clocksource/timer-tegra20.c
> index 4293943f4e2b..f66edd63d7f4 100644
> --- a/drivers/clocksource/timer-tegra20.c
> +++ b/drivers/clocksource/timer-tegra20.c
> @@ -15,21 +15,24 @@
> *
> */
>
> -#include <linux/init.h>
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/cpu.h>
> +#include <linux/cpumask.h>
> +#include <linux/delay.h>
> #include <linux/err.h>
> -#include <linux/time.h>
> #include <linux/interrupt.h>
> -#include <linux/irq.h>
> -#include <linux/clockchips.h>
> -#include <linux/clocksource.h>
> -#include <linux/clk.h>
> -#include <linux/io.h>
> #include <linux/of_address.h>
> #include <linux/of_irq.h>
> -#include <linux/sched_clock.h>
> -#include <linux/delay.h>
> +#include <linux/percpu.h>
> +#include <linux/syscore_ops.h>
> +#include <linux/time.h>
> +
> +#include "timer-of.h"
>
> +#ifdef CONFIG_ARM
> #include <asm/mach/time.h>
> +#endif
>
> #define RTC_SECONDS 0x08
> #define RTC_SHADOW_SECONDS 0x0c
> @@ -39,74 +42,145 @@
> #define TIMERUS_USEC_CFG 0x14
> #define TIMERUS_CNTR_FREEZE 0x4c
>
> -#define TIMER1_BASE 0x0
> -#define TIMER2_BASE 0x8
> -#define TIMER3_BASE 0x50
> -#define TIMER4_BASE 0x58
> -
> -#define TIMER_PTV 0x0
> -#define TIMER_PCR 0x4
> -
> +#define TIMER_PTV 0x0
> +#define TIMER_PTV_EN BIT(31)
> +#define TIMER_PTV_PER BIT(30)
> +#define TIMER_PCR 0x4
> +#define TIMER_PCR_INTR_CLR BIT(30)
> +
> +#ifdef CONFIG_ARM
> +#define TIMER_CPU0 0x50 /* TIMER3 */
> +#else
> +#define TIMER_CPU0 0x90 /* TIMER10 */
> +#define TIMER10_IRQ_IDX 10
> +#define IRQ_IDX_FOR_CPU(cpu) (TIMER10_IRQ_IDX + cpu)
> +#endif
> +#define TIMER_BASE_FOR_CPU(cpu) (TIMER_CPU0 + (cpu) * 8)
> +
> +static u32 usec_config;
> static void __iomem *timer_reg_base;
> +#ifdef CONFIG_ARM
> static void __iomem *rtc_base;
> -
> static struct timespec64 persistent_ts;
> static u64 persistent_ms, last_persistent_ms;

Did you check the above changes are still relevant after commit
39232ed5a1793f67 and after doing a change similar to
commit 1569557549697207e523 ?


> static struct delay_timer tegra_delay_timer;
> -
> -#define timer_writel(value, reg) \
> - writel_relaxed(value, timer_reg_base + (reg))
> -#define timer_readl(reg) \
> - readl_relaxed(timer_reg_base + (reg))
> +#endif
>
> static int tegra_timer_set_next_event(unsigned long cycles,
> struct clock_event_device *evt)
> {
> - u32 reg;
> + void __iomem *reg_base = timer_of_base(to_timer_of(evt));
>
> - reg = 0x80000000 | ((cycles > 1) ? (cycles-1) : 0);
> - timer_writel(reg, TIMER3_BASE + TIMER_PTV);
> + writel(TIMER_PTV_EN |
> + ((cycles > 1) ? (cycles - 1) : 0), /* n+1 scheme */
> + reg_base + TIMER_PTV);
>
> return 0;
> }
>
> -static inline void timer_shutdown(struct clock_event_device *evt)
> +static int tegra_timer_shutdown(struct clock_event_device *evt)
> {
> - timer_writel(0, TIMER3_BASE + TIMER_PTV);
> + void __iomem *reg_base = timer_of_base(to_timer_of(evt));
> +
> + writel(0, reg_base + TIMER_PTV);
> +
> + return 0;
> }
>
> -static int tegra_timer_shutdown(struct clock_event_device *evt)
> +static int tegra_timer_set_periodic(struct clock_event_device *evt)
> {
> - timer_shutdown(evt);
> + void __iomem *reg_base = timer_of_base(to_timer_of(evt));
> +
> + writel(TIMER_PTV_EN | TIMER_PTV_PER |
> + ((timer_of_rate(to_timer_of(evt)) / HZ) - 1),
> + reg_base + TIMER_PTV);
> +
> return 0;
> }
>
> -static int tegra_timer_set_periodic(struct clock_event_device *evt)
> +static irqreturn_t tegra_timer_isr(int irq, void *dev_id)
> {
> - u32 reg = 0xC0000000 | ((1000000 / HZ) - 1);
> + struct clock_event_device *evt = (struct clock_event_device *)dev_id;
> + void __iomem *reg_base = timer_of_base(to_timer_of(evt));
> +
> + writel(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
> + evt->event_handler(evt);
> +
> + return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_ARM64
> +static DEFINE_PER_CPU(struct timer_of, tegra_to) = {
> + .flags = TIMER_OF_CLOCK | TIMER_OF_BASE,
> +
> + .clkevt = {
> + .name = "tegra_timer",
> + .rating = 460,
> + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,

CLOCK_EVT_FEAT_DYNIRQ ?

> + .set_next_event = tegra_timer_set_next_event,
> + .set_state_shutdown = tegra_timer_shutdown,
> + .set_state_periodic = tegra_timer_set_periodic,
> + .set_state_oneshot = tegra_timer_shutdown,
> + .tick_resume = tegra_timer_shutdown,
> + },
> +};
> +
> +static int tegra_timer_setup(unsigned int cpu)
> +{
> + struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
> +
> + irq_force_affinity(to->clkevt.irq, cpumask_of(cpu));
> + enable_irq(to->clkevt.irq);
> +
> + clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
> + 1, /* min */
> + 0x1fffffff); /* 29 bits */
>
> - timer_shutdown(evt);
> - timer_writel(reg, TIMER3_BASE + TIMER_PTV);
> return 0;
> }
>
> -static struct clock_event_device tegra_clockevent = {
> - .name = "timer0",
> - .rating = 300,
> - .features = CLOCK_EVT_FEAT_ONESHOT |
> - CLOCK_EVT_FEAT_PERIODIC |
> - CLOCK_EVT_FEAT_DYNIRQ,
> - .set_next_event = tegra_timer_set_next_event,
> - .set_state_shutdown = tegra_timer_shutdown,
> - .set_state_periodic = tegra_timer_set_periodic,
> - .set_state_oneshot = tegra_timer_shutdown,
> - .tick_resume = tegra_timer_shutdown,
> +static int tegra_timer_stop(unsigned int cpu)
> +{
> + struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
> +
> + to->clkevt.set_state_shutdown(&to->clkevt);
> + disable_irq_nosync(to->clkevt.irq);
> +
> + return 0;
> +}
> +#else /* CONFIG_ARM */
> +static struct timer_of tegra_to = {
> + .flags = TIMER_OF_CLOCK | TIMER_OF_BASE | TIMER_OF_IRQ,
> +
> + .clkevt = {
> + .name = "tegra_timer",
> + .rating = 300,
> + .features = CLOCK_EVT_FEAT_ONESHOT |
> + CLOCK_EVT_FEAT_PERIODIC |
> + CLOCK_EVT_FEAT_DYNIRQ,
> + .set_next_event = tegra_timer_set_next_event,
> + .set_state_shutdown = tegra_timer_shutdown,
> + .set_state_periodic = tegra_timer_set_periodic,
> + .set_state_oneshot = tegra_timer_shutdown,
> + .tick_resume = tegra_timer_shutdown,
> + .cpumask = cpu_possible_mask,
> + },
> +
> + .of_irq = {
> + .index = 2,
> + .flags = IRQF_TIMER | IRQF_TRIGGER_HIGH,
> + .handler = tegra_timer_isr,
> + },
> };
>
> static u64 notrace tegra_read_sched_clock(void)
> {
> - return timer_readl(TIMERUS_CNTR_1US);
> + return readl(timer_reg_base + TIMERUS_CNTR_1US);
> +}
> +
> +static unsigned long tegra_delay_timer_read_counter_long(void)
> +{
> + return readl(timer_reg_base + TIMERUS_CNTR_1US);
> }
>
> /*
> @@ -143,98 +217,188 @@ static void tegra_read_persistent_clock64(struct timespec64 *ts)
> timespec64_add_ns(&persistent_ts, delta * NSEC_PER_MSEC);
> *ts = persistent_ts;
> }
> +#endif
>
> -static unsigned long tegra_delay_timer_read_counter_long(void)
> +static int tegra_timer_suspend(void)
> {
> - return readl(timer_reg_base + TIMERUS_CNTR_1US);
> +#ifdef CONFIG_ARM64

Please do not add those #ifdef but function stubs.

> + int cpu;
> +
> + for_each_possible_cpu(cpu) {
> + struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
> + void __iomem *reg_base = timer_of_base(to);
> +
> + writel(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
> + }
> +#else
> + void __iomem *reg_base = timer_of_base(&tegra_to);
> +
> + writel(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
> +#endif
> +
> + return 0;
> }
>
> -static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
> +static void tegra_timer_resume(void)
> {
> - struct clock_event_device *evt = (struct clock_event_device *)dev_id;
> - timer_writel(1<<30, TIMER3_BASE + TIMER_PCR);
> - evt->event_handler(evt);
> - return IRQ_HANDLED;
> + writel(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
> }
>
> -static struct irqaction tegra_timer_irq = {
> - .name = "timer0",
> - .flags = IRQF_TIMER | IRQF_TRIGGER_HIGH,
> - .handler = tegra_timer_interrupt,
> - .dev_id = &tegra_clockevent,
> +static struct syscore_ops tegra_timer_syscore_ops = {
> + .suspend = tegra_timer_suspend,
> + .resume = tegra_timer_resume,
> };

It will be nicer to use the suspend/resume callbacks defined in the
clockevent structure, so you can use generic as there are multiple
clockevents defined for the tegra210, thus multiple timer-of
encapsulating them. When the suspend/resume callbacks are called, they
have the clock_event pointer and you can use it to retrieve the timer-of
and then the base address. At the end, the callbacks will end up the
same for tegra20 and tegra210.

> -static int __init tegra20_init_timer(struct device_node *np)
> +static int tegra_timer_init(struct device_node *np, struct timer_of *to)
> {
> - struct clk *clk;
> - unsigned long rate;
> - int ret;
> + int ret = 0;
>
> - timer_reg_base = of_iomap(np, 0);
> - if (!timer_reg_base) {
> - pr_err("Can't map timer registers\n");
> - return -ENXIO;
> - }
> + ret = timer_of_init(np, to);
> + if (ret < 0)
> + goto out;
>
> - tegra_timer_irq.irq = irq_of_parse_and_map(np, 2);
> - if (tegra_timer_irq.irq <= 0) {
> - pr_err("Failed to map timer IRQ\n");
> - return -EINVAL;
> - }
> + timer_reg_base = timer_of_base(to);
>
> - clk = of_clk_get(np, 0);
> - if (IS_ERR(clk)) {
> - pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
> - rate = 12000000;
> - } else {
> - clk_prepare_enable(clk);
> - rate = clk_get_rate(clk);
> - }
> -
> - switch (rate) {
> + /*
> + * Configure microsecond timers to have 1MHz clock
> + * Config register is 0xqqww, where qq is "dividend", ww is "divisor"
> + * Uses n+1 scheme
> + */
> + switch (timer_of_rate(to)) {
> case 12000000:
> - timer_writel(0x000b, TIMERUS_USEC_CFG);
> + usec_config = 0x000b; /* (11+1)/(0+1) */
> + break;
> + case 12800000:
> + usec_config = 0x043f; /* (63+1)/(4+1) */
> break;
> case 13000000:
> - timer_writel(0x000c, TIMERUS_USEC_CFG);
> + usec_config = 0x000c; /* (12+1)/(0+1) */
> + break;
> + case 16800000:
> + usec_config = 0x0453; /* (83+1)/(4+1) */
> break;
> case 19200000:
> - timer_writel(0x045f, TIMERUS_USEC_CFG);
> + usec_config = 0x045f; /* (95+1)/(4+1) */
> break;
> case 26000000:
> - timer_writel(0x0019, TIMERUS_USEC_CFG);
> + usec_config = 0x0019; /* (25+1)/(0+1) */
> + break;
> + case 38400000:
> + usec_config = 0x04bf; /* (191+1)/(4+1) */
> + break;
> + case 48000000:
> + usec_config = 0x002f; /* (47+1)/(0+1) */
> break;
> default:
> - WARN(1, "Unknown clock rate");
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + writel(usec_config, timer_of_base(to) + TIMERUS_USEC_CFG);
> +
> + register_syscore_ops(&tegra_timer_syscore_ops);
> +out:
> + return ret;
> +}
> +
> +#ifdef CONFIG_ARM64
> +static int __init tegra210_timer_init(struct device_node *np)
> +{
> + int cpu, ret = 0;
> + struct timer_of *to;
> +
> + to = this_cpu_ptr(&tegra_to);
> + ret = tegra_timer_init(np, to);
> + if (ret < 0)
> + goto out;
> +
> + for_each_possible_cpu(cpu) {
> + struct timer_of *cpu_to;
> +
> + cpu_to = per_cpu_ptr(&tegra_to, cpu);
> + cpu_to->of_base.base = timer_reg_base + TIMER_BASE_FOR_CPU(cpu);
> + cpu_to->of_clk.rate = timer_of_rate(to);
> + cpu_to->clkevt.cpumask = cpumask_of(cpu);
> +
> + cpu_to->clkevt.irq =
> + irq_of_parse_and_map(np, IRQ_IDX_FOR_CPU(cpu));
> + if (!cpu_to->clkevt.irq) {
> + pr_err("%s: can't map IRQ for CPU%d\n",
> + __func__, cpu);
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + irq_set_status_flags(cpu_to->clkevt.irq, IRQ_NOAUTOEN);
> + ret = request_irq(cpu_to->clkevt.irq, tegra_timer_isr,
> + IRQF_TIMER | IRQF_NOBALANCING,
> + cpu_to->clkevt.name, &cpu_to->clkevt);
> + if (ret) {
> + pr_err("%s: cannot setup irq %d for CPU%d\n",
> + __func__, cpu_to->clkevt.irq, cpu);
> + ret = -EINVAL;
> + goto out_irq;
> + }
> + }

You should configure the timer in the tegra_timer_setup() function
instead of using this cpu loop.

> +
> + cpuhp_setup_state(CPUHP_AP_TEGRA_TIMER_STARTING,
> + "AP_TEGRA_TIMER_STARTING", tegra_timer_setup,
> + tegra_timer_stop);
> +
> + return ret;
> +
> +out_irq:
> + for_each_possible_cpu(cpu) {
> + struct timer_of *cpu_to;
> +
> + cpu_to = per_cpu_ptr(&tegra_to, cpu);
> + if (cpu_to->clkevt.irq) {
> + free_irq(cpu_to->clkevt.irq, &cpu_to->clkevt);
> + irq_dispose_mapping(cpu_to->clkevt.irq);
> + }
> }
> +out:
> + timer_of_cleanup(to);
> + return ret;
> +}
> +TIMER_OF_DECLARE(tegra210_timer, "nvidia,tegra210-timer", tegra210_timer_init);
> +#else /* CONFIG_ARM */

Don't use the macro to select one or another. Just define the functions
and let the init postcalls to free the memory.

> +static int __init tegra20_init_timer(struct device_node *np)
> +{
> + int ret = 0;
> +
> + ret = tegra_timer_init(np, &tegra_to);
> + if (ret < 0)
> + goto out;
>
> - sched_clock_register(tegra_read_sched_clock, 32, 1000000);
> + tegra_to.of_base.base = timer_reg_base + TIMER_BASE_FOR_CPU(0);
> + tegra_to.of_clk.rate = 1000000; /* microsecond timer */
>
> + sched_clock_register(tegra_read_sched_clock, 32,
> + timer_of_rate(&tegra_to));
> ret = clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
> - "timer_us", 1000000, 300, 32,
> - clocksource_mmio_readl_up);
> + "timer_us", timer_of_rate(&tegra_to),
> + 300, 32, clocksource_mmio_readl_up);
> if (ret) {
> pr_err("Failed to register clocksource\n");
> - return ret;
> + goto out;
> }
>
> tegra_delay_timer.read_current_timer =
> tegra_delay_timer_read_counter_long;
> - tegra_delay_timer.freq = 1000000;
> + tegra_delay_timer.freq = timer_of_rate(&tegra_to);
> register_current_timer_delay(&tegra_delay_timer);
>
> - ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
> - if (ret) {
> - pr_err("Failed to register timer IRQ: %d\n", ret);
> - return ret;
> - }
> + clockevents_config_and_register(&tegra_to.clkevt,
> + timer_of_rate(&tegra_to),
> + 0x1,
> + 0x1fffffff);
>
> - tegra_clockevent.cpumask = cpu_possible_mask;
> - tegra_clockevent.irq = tegra_timer_irq.irq;
> - clockevents_config_and_register(&tegra_clockevent, 1000000,
> - 0x1, 0x1fffffff);
> + return ret;
> +out:
> + timer_of_cleanup(&tegra_to);
>
> - return 0;
> + return ret;
> }
> TIMER_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
>
> @@ -261,3 +425,4 @@ static int __init tegra20_init_rtc(struct device_node *np)
> return register_persistent_clock(tegra_read_persistent_clock64);
> }
> TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
> +#endif
> diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
> index fd586d0301e7..e78281d07b70 100644
> --- a/include/linux/cpuhotplug.h
> +++ b/include/linux/cpuhotplug.h
> @@ -121,6 +121,7 @@ enum cpuhp_state {
> CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
> CPUHP_AP_ARM_TWD_STARTING,
> CPUHP_AP_QCOM_TIMER_STARTING,
> + CPUHP_AP_TEGRA_TIMER_STARTING,
> CPUHP_AP_ARMADA_TIMER_STARTING,
> CPUHP_AP_MARCO_TIMER_STARTING,
> CPUHP_AP_MIPS_GIC_TIMER_STARTING,
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2019-02-15 16:15    [W:0.116 / U:7.828 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site