lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 3/3] enetc: Add ENETC PF level external MDIO support
Date
Each ENETC PF has its own MDIO interface, the corresponding
MDIO registers are mapped in the ENETC's Port register block.
The current patch adds a driver for these PF level MDIO buses,
so that each PF can manage directly its own external link.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
---
v2 - used readx_poll_timeout()
- added mdio node child to the port node
- added code comments, removed redundant err messages,
minor code cleanup

drivers/net/ethernet/freescale/enetc/Makefile | 3 +-
drivers/net/ethernet/freescale/enetc/enetc_mdio.c | 199 ++++++++++++++++++++++
drivers/net/ethernet/freescale/enetc/enetc_pf.c | 12 ++
drivers/net/ethernet/freescale/enetc/enetc_pf.h | 6 +
4 files changed, 219 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/freescale/enetc/enetc_mdio.c

diff --git a/drivers/net/ethernet/freescale/enetc/Makefile b/drivers/net/ethernet/freescale/enetc/Makefile
index 6976602..7139e41 100644
--- a/drivers/net/ethernet/freescale/enetc/Makefile
+++ b/drivers/net/ethernet/freescale/enetc/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o
-fsl-enetc-$(CONFIG_FSL_ENETC) += enetc.o enetc_cbdr.o enetc_ethtool.o
+fsl-enetc-$(CONFIG_FSL_ENETC) += enetc.o enetc_cbdr.o enetc_ethtool.o \
+ enetc_mdio.o
fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
fsl-enetc-objs := enetc_pf.o $(fsl-enetc-y)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
new file mode 100644
index 0000000..f715487
--- /dev/null
+++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright 2019 NXP */
+
+#include <linux/mdio.h>
+#include <linux/of_mdio.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+
+#include "enetc_pf.h"
+
+struct enetc_mdio_regs {
+ u32 mdio_cfg; /* MDIO configuration and status */
+ u32 mdio_ctl; /* MDIO control */
+ u32 mdio_data; /* MDIO data */
+ u32 mdio_addr; /* MDIO address */
+};
+
+#define bus_to_enetc_regs(bus) (struct enetc_mdio_regs __iomem *)((bus)->priv)
+
+#define ENETC_MDIO_REG_OFFSET 0x1c00
+#define ENETC_MDC_DIV 258
+
+#define MDIO_CFG_CLKDIV(x) ((((x) >> 1) & 0xff) << 8)
+#define MDIO_CFG_BSY BIT(0)
+#define MDIO_CFG_RD_ER BIT(1)
+#define MDIO_CFG_ENC45 BIT(6)
+ /* external MDIO only - driven on neg MDC edge */
+#define MDIO_CFG_NEG BIT(23)
+
+#define MDIO_CTL_DEV_ADDR(x) ((x) & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x) (((x) & 0x1f) << 5)
+#define MDIO_CTL_READ BIT(15)
+#define MDIO_DATA(x) ((x) & 0xffff)
+
+#define TIMEOUT 1000
+static int enetc_mdio_wait_complete(struct enetc_mdio_regs __iomem *regs)
+{
+ u32 val;
+
+ return readx_poll_timeout(enetc_rd_reg, &regs->mdio_cfg, val,
+ !(val & MDIO_CFG_BSY), 10, 10 * TIMEOUT);
+}
+
+static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
+ u16 value)
+{
+ struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus);
+ u32 mdio_ctl, mdio_cfg;
+ u16 dev_addr;
+ int ret;
+
+ mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
+ if (regnum & MII_ADDR_C45) {
+ dev_addr = (regnum >> 16) & 0x1f;
+ mdio_cfg |= MDIO_CFG_ENC45;
+ } else {
+ /* clause 22 (ie 1G) */
+ dev_addr = regnum & 0x1f;
+ mdio_cfg &= ~MDIO_CFG_ENC45;
+ }
+
+ enetc_wr_reg(&regs->mdio_cfg, mdio_cfg);
+
+ ret = enetc_mdio_wait_complete(regs);
+ if (ret)
+ return ret;
+
+ /* set port and dev addr */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
+ enetc_wr_reg(&regs->mdio_ctl, mdio_ctl);
+
+ /* set the register address */
+ if (regnum & MII_ADDR_C45) {
+ enetc_wr_reg(&regs->mdio_addr, regnum & 0xffff);
+
+ ret = enetc_mdio_wait_complete(regs);
+ if (ret)
+ return ret;
+ }
+
+ /* write the value */
+ enetc_wr_reg(&regs->mdio_data, MDIO_DATA(value));
+
+ ret = enetc_mdio_wait_complete(regs);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+ struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus);
+ u32 mdio_ctl, mdio_cfg;
+ u16 dev_addr, value;
+ int ret;
+
+ mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
+ if (regnum & MII_ADDR_C45) {
+ dev_addr = (regnum >> 16) & 0x1f;
+ mdio_cfg |= MDIO_CFG_ENC45;
+ } else {
+ dev_addr = regnum & 0x1f;
+ mdio_cfg &= ~MDIO_CFG_ENC45;
+ }
+
+ enetc_wr_reg(&regs->mdio_cfg, mdio_cfg);
+
+ ret = enetc_mdio_wait_complete(regs);
+ if (ret)
+ return ret;
+
+ /* set port and device addr */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
+ enetc_wr_reg(&regs->mdio_ctl, mdio_ctl);
+
+ /* set the register address */
+ if (regnum & MII_ADDR_C45) {
+ enetc_wr_reg(&regs->mdio_addr, regnum & 0xffff);
+
+ ret = enetc_mdio_wait_complete(regs);
+ if (ret)
+ return ret;
+ }
+
+ /* initiate the read */
+ enetc_wr_reg(&regs->mdio_ctl, mdio_ctl | MDIO_CTL_READ);
+
+ ret = enetc_mdio_wait_complete(regs);
+ if (ret)
+ return ret;
+
+ /* return all Fs if nothing was there */
+ if (enetc_rd_reg(&regs->mdio_cfg) & MDIO_CFG_RD_ER) {
+ dev_err(&bus->dev,
+ "Error while reading PHY%d reg at %d.%hhu\n",
+ phy_id, dev_addr, regnum);
+ return 0xffff;
+ }
+
+ value = enetc_rd_reg(&regs->mdio_data) & 0xffff;
+
+ return value;
+}
+
+int enetc_mdio_probe(struct enetc_pf *pf)
+{
+ struct device *dev = &pf->si->pdev->dev;
+ struct enetc_mdio_regs __iomem *regs;
+ struct device_node *np;
+ struct mii_bus *bus;
+ int ret;
+
+ bus = mdiobus_alloc_size(sizeof(regs));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "Freescale ENETC MDIO Bus";
+ bus->read = enetc_mdio_read;
+ bus->write = enetc_mdio_write;
+ bus->parent = dev;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
+
+ /* store the enetc mdio base address for this bus */
+ regs = pf->si->hw.port + ENETC_MDIO_REG_OFFSET;
+ bus->priv = regs;
+
+ np = of_get_child_by_name(dev->of_node, "mdio");
+ if (!np) {
+ dev_err(dev, "MDIO node missing\n");
+ ret = -EINVAL;
+ goto err_registration;
+ }
+
+ ret = of_mdiobus_register(bus, np);
+ if (ret) {
+ of_node_put(np);
+ dev_err(dev, "cannot register MDIO bus\n");
+ goto err_registration;
+ }
+
+ of_node_put(np);
+ pf->mdio = bus;
+
+ return 0;
+
+err_registration:
+ mdiobus_free(bus);
+
+ return ret;
+}
+
+void enetc_mdio_remove(struct enetc_pf *pf)
+{
+ if (pf->mdio) {
+ mdiobus_unregister(pf->mdio);
+ mdiobus_free(pf->mdio);
+ }
+}
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 7d28f5e..15876a6 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -746,6 +746,7 @@ static void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,

static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
{
+ struct enetc_pf *pf = enetc_si_priv(priv->si);
struct device_node *np = priv->dev->of_node;
int err;

@@ -770,12 +771,22 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
priv->phy_node = of_node_get(np);
}

+ if (!of_phy_is_fixed_link(np)) {
+ err = enetc_mdio_probe(pf);
+ if (err) {
+ of_node_put(priv->phy_node);
+ return err;
+ }
+ }
+
priv->if_mode = of_get_phy_mode(np);
if (priv->if_mode < 0) {
dev_err(priv->dev, "missing phy type\n");
of_node_put(priv->phy_node);
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
+ else
+ enetc_mdio_remove(pf);

return -EINVAL;
}
@@ -898,6 +909,7 @@ static void enetc_pf_remove(struct pci_dev *pdev)

unregister_netdev(si->ndev);

+ enetc_mdio_remove(pf);
enetc_of_put_phy(priv);

enetc_free_msix(priv);
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
index 2061ae5..10dd1b5 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
@@ -42,8 +42,14 @@ struct enetc_pf {
char vlan_promisc_simap; /* bitmap of SIs in VLAN promisc mode */
DECLARE_BITMAP(vlan_ht_filter, ENETC_VLAN_HT_SIZE);
DECLARE_BITMAP(active_vlans, VLAN_N_VID);
+
+ struct mii_bus *mdio; /* saved for cleanup */
};

int enetc_msg_psi_init(struct enetc_pf *pf);
void enetc_msg_psi_free(struct enetc_pf *pf);
void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int mbox_id, u16 *status);
+
+/* MDIO */
+int enetc_mdio_probe(struct enetc_pf *pf);
+void enetc_mdio_remove(struct enetc_pf *pf);
--
2.7.4
\
 
 \ /
  Last update: 2019-02-15 11:11    [W:0.068 / U:1.520 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site