lkml.org 
[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 3.18 09/16] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
Date
From: Tomonori Sakita <tomonori.sakita@sord.co.jp>

[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ]

Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4.

Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp>
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/fsl_lpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 92b7a5bf7c4d..8c4f561a09c0 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1422,7 +1422,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
}

/* ask the core to calculate the divisor */
- baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+ baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 4);

spin_lock_irqsave(&sport->port.lock, flags);

--
2.19.1
\
 
 \ /
  Last update: 2019-02-15 03:17    [W:0.164 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site