lkml.org 
[lkml]   [2019]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 03/12] iommu/vt-d: Add helper to set an IRTE to verify only the bus number
The current code uses set_irte_sid() with SVT_VERIFY_BUS and PCI_DEVID
to set the SID value. However, this is very confusing because, with
SVT_VERIFY_BUS, the SID value is not a PCI devfn address, but the start
and end bus numbers to match against.

According to the Intel Virtualization Technology for Directed I/O
Architecture Specification, Rev. 3.0, page 9-36:

The most significant 8-bits of the SID field contains the Startbus#,
and the least significant 8-bits of the SID field contains the Endbus#.
Interrupt requests that reference this IRTE must have a requester-id
whose bus# (most significant 8-bits of requester-id) has a value equal
to or within the Startbus# to Endbus# range.

So to make this more clear, introduce a new set_irte_verify_bus() that
explicitly takes a start bus and end bus so that we can stop abusing
the PCI_DEVID macro.

This helper function will be called a second time in an subsequent patch.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
drivers/iommu/intel_irq_remapping.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 24d45b07f425..5a55bef8e379 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -294,6 +294,18 @@ static void set_irte_sid(struct irte *irte, unsigned int svt,
irte->sid = sid;
}

+/*
+ * Set an IRTE to match only the bus number. Interrupt requests that reference
+ * this IRTE must have a requester-id whose bus number is between or equal
+ * to the start_bus and end_bus arguments.
+ */
+static void set_irte_verify_bus(struct irte *irte, unsigned int start_bus,
+ unsigned int end_bus)
+{
+ set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16,
+ (start_bus << 8) | end_bus);
+}
+
static int set_ioapic_sid(struct irte *irte, int apic)
{
int i;
@@ -391,9 +403,8 @@ static int set_msi_sid(struct irte *irte, struct pci_dev *dev)
* original device.
*/
if (PCI_BUS_NUM(data.alias) != data.pdev->bus->number)
- set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16,
- PCI_DEVID(PCI_BUS_NUM(data.alias),
- dev->bus->number));
+ set_irte_verify_bus(irte, PCI_BUS_NUM(data.alias),
+ dev->bus->number);
else if (data.pdev->bus->number != dev->bus->number)
set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, data.alias);
else
--
2.19.0
\
 
 \ /
  Last update: 2019-02-13 18:57    [W:0.234 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site