lkml.org 
[lkml]   [2019]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc: spi: Fix card detection during probe
Date
When using the mmc_spi driver with a card-detect pin, I noticed that the
card was not detected immediately after probe, but only after it was
unplugged and plugged back in (and the CD IRQ fired).

The call tree looks something like this:

mmc_spi_probe
mmc_add_host
mmc_start_host
_mmc_detect_change
mmc_schedule_delayed_work(&host->detect, 0)
mmc_rescan
host->bus_ops->detect(host)
mmc_detect
_mmc_detect_card_removed
host->ops->get_cd(host)
mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set)
mmc_gpiod_request_cd
ctx->cd_gpio = desc

To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ
is registered.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
drivers/mmc/host/mmc_spi.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 10ba46b728e8..8ade14fb2148 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1450,6 +1450,7 @@ static int mmc_spi_probe(struct spi_device *spi)
mmc->caps &= ~MMC_CAP_NEEDS_POLL;
mmc_gpiod_request_cd_irq(mmc);
}
+ mmc_detect_change(mmc, 0);

/* Index 1 is write protect/read only */
status = mmc_gpiod_request_ro(mmc, NULL, 1, false, 0, NULL);
--
2.20.1
\
 
 \ /
  Last update: 2019-02-10 18:33    [W:0.145 / U:4.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site