lkml.org 
[lkml]   [2019]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] spi: gpio: Advertise support for SPI_CS_HIGH
Date
The spi-gpio driver already handles different chip select polarities,
but so far this was not advertised in master->mode_bits.

This patch fixes mmc_spi on top of spi_gpio, which is useful in some
testing scenarios.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
drivers/spi/spi-gpio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index a4aee26028cd..3e98c1a0ba6d 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -428,7 +428,8 @@ static int spi_gpio_probe(struct platform_device *pdev)
return status;

master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
- master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL;
+ master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL |
+ SPI_CS_HIGH;
master->flags = master_flags;
master->bus_num = pdev->id;
/* The master needs to think there is a chipselect even if not connected */
--
2.20.1
\
 
 \ /
  Last update: 2019-02-10 18:12    [W:0.036 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site